#436094 Agility Robotics Unveils Upgraded Digit ...

Last time we saw Agility Robotics’ Digit biped, it was picking up a box from a Ford delivery van and autonomously dropping it off on a porch, while at the same time managing to not trip over stairs, grass, or small children. As a demo, it was pretty impressive, but of course there’s an enormous gap between making a video of a robot doing a successful autonomous delivery and letting that robot out into the semi-structured world and expecting it to reliably do a good job.

Agility Robotics is aware of this, of course, and over the last six months they’ve been making substantial improvements to Digit to make it more capable and robust. A new video posted today shows what’s new with the latest version of Digit—Digit v2.

We appreciate Agility Robotics foregoing music in the video, which lets us hear exactly what Digit sounds like in operation. The most noticeable changes are in Digit’s feet, torso, and arms, and I was particularly impressed to see Digit reposition the box on the table before grasping it to make sure that it could get a good grip. Otherwise, it’s hard to tell what’s new, so we asked Agility Robotics’ CEO Damion Shelton to get us up to speed.

IEEE Spectrum: Can you summarize the differences between Digit v1 and v2? We’re particularly interested in the new feet.

Damion Shelton: The feet now include a roll degree of freedom, so that Digit can resist lateral forces without needing to side step. This allows Digit v2 to balance on one foot statically, which Digit v1 and Cassie could not do. The larger foot also dramatically decreases load per unit area, for improved performance on very soft surfaces like sand.

The perception stack includes four Intel RealSense cameras used for obstacle detection and pick/place, plus the lidar. In Digit v1, the perception systems were brought up incrementally over time for development purposes. In Digit v2, all perception systems are active from the beginning and tied to a dedicated computer. The perception system is used for a number of additional things beyond manipulation, which we’ll start to show in the next few weeks.

The torso changes are a bit more behind-the-scenes. All of the electronics in it are now fully custom, thermally managed, and environmentally sealed. We’ve also included power and ethernet to a payload bay that can fit either a NUC or Jetson module (or other customer payload).

What exactly are we seeing in the video in terms of Digit’s autonomous capabilities?

At the moment this is a demonstration of shared autonomy. Picking and placing the box is fully autonomous. Balance and footstep placement are fully autonomous, but guidance and obstacle avoidance are under local teleop. It’s no longer a radio controller as in early videos; we’re not ready to reveal our current controller design but it’s a reasonably significant upgrade. This is v2 hardware, so there’s one more full version in development prior to the 2020 launch, which will expand the autonomy envelope significantly.

“This is a demonstration of shared autonomy. Picking and placing the box is fully autonomous. Balance and footstep placement are fully autonomous, but guidance and obstacle avoidance are under local teleop. It’s no longer a radio controller as in early videos; we’re not ready to reveal our current controller design but it’s a reasonably significant upgrade”
—Damion Shelton, Agility Robotics

What are some unique features or capabilities of Digit v2 that might not be obvious from the video?

For those who’ve used Cassie robots, the power-up and power-down ergonomics are a lot more user friendly. Digit can be disassembled into carry-on luggage sized pieces (give or take) in under 5 minutes for easy transport. The battery charges in-situ using a normal laptop-style charger.

I’m curious about this “stompy” sort of gait that we see in Digit and many other bipedal robots—are there significant challenges or drawbacks to implementing a more human-like (and presumably quieter) heel-toe gait?

There are no drawbacks other than increased complexity in controls and foot design. With Digit v2, the larger surface area helps with the noise, and v2 has similar or better passive-dynamic performance as compared to Cassie or Digit v1. The foot design is brand new, and new behaviors like heel-toe are an active area of development.

How close is Digit v2 to a system that you’d be comfortable operating commercially?

We’re on track for a 2020 launch for Digit v3. Changes from v2 to v3 are mostly bug-fix in nature, with a few regulatory upgrades like full battery certification. Safety is a major concern for us, and we have launch customers that will be operating Digit in a safe environment, with a phased approach to relaxing operational constraints. Digit operates almost exclusively under force control (as with cobots more generally), but at the moment we’ll err on the side of caution during operation until we have the stats to back up safety and reliability. The legged robot industry has too much potential for us to screw it up by behaving irresponsibly.

It will be a while before Digit (or any other humanoid robot) is operating fully autonomously in crowds of people, but there are so many large market opportunities (think indoor factory/warehouse environments) to address prior to that point that we expect to mature the operational safety side of things well in advance of having saturated the more robot-tolerant markets.

[ Agility Robotics ]

[Read more…]