Tag Archives: evidence

#437103 How to Make Sense of Uncertainty in a ...

As the internet churns with information about Covid-19, about the virus that causes the disease, and about what we’re supposed to do to fight it, it can be difficult to see the forest for the trees. What can we realistically expect for the rest of 2020? And how do we even know what’s realistic?

Today, humanity’s primary, ideal goal is to eliminate the virus, SARS-CoV-2, and Covid-19. Our second-choice goal is to control virus transmission. Either way, we have three big aims: to save lives, to return to public life, and to keep the economy functioning.

To hit our second-choice goal—and maybe even our primary goal—countries are pursuing five major public health strategies. Note that many of these advances cross-fertilize: for example, advances in virus testing and antibody testing will drive data-based prevention efforts.

Five major public health strategies are underway to bring Covid-19 under control and to contain the spread of SARS-CoV-2.
These strategies arise from things we can control based on the things that we know at any given moment. But what about the things we can’t control and don’t yet know?

The biology of the virus and how it interacts with our bodies is what it is, so we should seek to understand it as thoroughly as possible. How long any immunity gained from prior infection lasts—and indeed whether people develop meaningful immunity at all after infection—are open questions urgently in need of greater clarity. Similarly, right now it’s important to focus on understanding rather than making assumptions about environmental factors like seasonality.

But the biggest question on everyone’s lips is, “When?” When will we see therapeutic progress against Covid-19? And when will life get “back to normal”? There are lots of models out there on the internet; which of those models are right? The simple answer is “none of them.” That’s right—it’s almost certain that every model you’ve seen is wrong in at least one detail, if not all of them. But modeling is meant to be a tool for deeper thinking, a way to run mental (and computational) experiments before—and while—taking action. As George E. P. Box famously wrote in 1976, “All models are wrong, but some are useful.”

Here, we’re seeking useful insights, as opposed to exact predictions, which is why we’re pulling back from quantitative details to get at the mindsets that will support agency and hope. To that end, I’ve been putting together timelines that I believe will yield useful expectations for the next year or two—and asking how optimistic I need to be in order to believe a particular timeline.

For a moderately optimistic scenario to be relevant, breakthroughs in science and technology come at paces expected based on previous efforts and assumptions that turn out to be basically correct; accessibility of those breakthroughs increases at a reasonable pace; regulation achieves its desired effects, without major surprises; and compliance with regulations is reasonably high.

In contrast, if I’m being highly optimistic, breakthroughs in science and technology and their accessibility come more quickly than they ever have before; regulation is evidence-based and successful in the first try or two; and compliance with those regulations is high and uniform. If I’m feeling not-so-optimistic, then I anticipate serious setbacks to breakthroughs and accessibility (with the overturning of many important assumptions), repeated failure of regulations to achieve their desired outcomes, and low compliance with those regulations.

The following scenarios outline the things that need to happen in the fight against Covid-19, when I expect to see them, and how confident I feel in those expectations. They focus on North America and Europe because there are data missing about China’s 2019 outbreak and other regions are still early in their outbreaks. Perhaps the most important thing to keep in mind throughout: We know more today than we did yesterday, but we still have much to learn. New knowledge derived from greater study and debate will almost certainly inspire ongoing course corrections.

As you dive into the scenarios below, practice these three mindset shifts. First, defeating Covid-19 will be a marathon, not a sprint. We shouldn’t expect life to look like 2019 for the next year or two—if ever. As Ed Yong wrote recently in The Atlantic, “There won’t be an obvious moment when everything is under control and regular life can safely resume.” Second, remember that you have important things to do for at least a year. And third, we are all in this together. There is no “us” and “them.” We must all be alert, responsive, generous, and strong throughout 2020 and 2021—and willing to throw away our assumptions when scientific evidence invalidates them.

The Middle Way: Moderate Optimism
Let’s start with the case in which I have the most confidence: moderate optimism.

This timeline considers milestones through late 2021, the earliest that I believe vaccines will become available. The “normal” timeline for developing a vaccine for diseases like seasonal flu is 18 months, which leads to my projection that we could potentially have vaccines as soon as 18 months from the first quarter of 2020. While Melinda Gates agrees with that projection, others (including AI) believe that 3 to 5 years is far more realistic, based on past vaccine development and the need to test safety and efficacy in humans. However, repurposing existing vaccines against other diseases—or piggybacking off clever synthetic platforms—could lead to vaccines being available sooner. I tried to balance these considerations for this moderately optimistic scenario. Either way, deploying vaccines at the end of 2021 is probably much later than you may have been led to believe by the hype engine. Again, if you take away only one message from this article, remember that the fight against Covid-19 is a marathon, not a sprint.

Here, I’ve visualized a moderately optimistic scenario as a baseline. Think of these timelines as living guides, as opposed to exact predictions. There are still many unknowns. More or less optimistic views (see below) and new information could shift these timelines forward or back and change the details of the strategies.
Based on current data, I expect that the first wave of Covid-19 cases (where we are now) will continue to subside in many areas, leading governments to ease restrictions in an effort to get people back to work. We’re already seeing movement in that direction, with a variety of benchmarks and changes at state and country levels around the world. But depending on the details of the changes, easing restrictions will probably cause a second wave of sickness (see Germany and Singapore), which should lead governments to reimpose at least some restrictions.

In tandem, therapeutic efforts will be transitioning from emergency treatments to treatments that have been approved based on safety and efficacy data in clinical trials. In a moderately optimistic scenario, assuming clinical trials currently underway yield at least a few positive results, this shift to mostly approved therapies could happen as early as the third or fourth quarter of this year and continue from there. One approval that should come rather quickly is for plasma therapies, in which the blood from people who have recovered from Covid-19 is used as a source of antibodies for people who are currently sick.

Companies around the world are working on both viral and antibody testing, focusing on speed, accuracy, reliability, and wide accessibility. While these tests are currently being run in hospitals and research laboratories, at-home testing is a critical component of the mass testing we’ll need to keep viral spread in check. These are needed to minimize the impact of asymptomatic cases, test the assumption that infection yields resistance to subsequent infection (and whether it lasts), and construct potential immunity passports if this assumption holds. Testing is also needed for contact tracing efforts to prevent further spread and get people back to public life. Finally, it’s crucial to our fundamental understanding of the biology of SARS-CoV-2 and Covid-19.

We need tests that are very reliable, both in the clinic and at home. So, don’t go buying any at-home test kits just yet, even if you find them online. Wait for reliable test kits and deeper understanding of how a test result translates to everyday realities. If we’re moderately optimistic, in-clinic testing will rapidly expand this quarter and/or next, with the possibility of broadly available, high-quality at-home sampling (and perhaps even analysis) thereafter.

Note that testing is not likely to be a “one-and-done” endeavor, as a person’s infection and immunity status change over time. Expect to be testing yourself—and your family—often as we move later into 2020.

Testing data are also going to inform distancing requirements at the country and local levels. In this scenario, restrictions—at some level of stringency—could persist at least through the end of 2020, as most countries are way behind the curve on testing (Iceland is an informative exception). Governments will likely continue to ask citizens to work from home if at all possible; to wear masks or face coverings in public; to employ heightened hygiene and social distancing in workplaces; and to restrict travel and social gatherings. So while it’s likely we’ll be eating in local restaurants again in 2020 in this scenario, at least for a little while, it’s not likely we’ll be heading to big concerts any time soon.

The Extremes: High and Low Optimism
How would high and low levels of optimism change our moderately optimistic timeline? The milestones are the same, but the time required to achieve them is shorter or longer, respectively. Quantifying these shifts is less important than acknowledging and incorporating a range of possibilities into our view. It pays to pay attention to our bias. Here are a few examples of reasonable possibilities that could shift the moderately optimistic timeline.

When vaccines become available
Vaccine repurposing could shorten the time for vaccines to become available; today, many vaccine candidates are in various stages of testing. On the other hand, difficulties in manufacture and distribution, or faster-than-expected mutation of SARS-CoV-2, could slow vaccine development. Given what we know now, I am not strongly concerned about either of these possibilities—drug companies are rapidly expanding their capabilities, and viral mutation isn’t an urgent concern at this time based on sequencing data—but they could happen.

At first, governments will likely supply vaccines to essential workers such as healthcare workers, but it is essential that vaccines become widely available around the world as quickly and as safely as possible. Overall, I suggest a dose of skepticism when reading highly optimistic claims about a vaccine (or multiple vaccines) being available in 2020. Remember, a vaccine is a knockout punch, not a first line of defense for an outbreak.

When testing hits its stride
While I am confident that testing is a critical component of our response to Covid-19, reliability is incredibly important to testing for SARS-CoV-2 and for immunity to the disease, particularly at home. For an individual, a false negative (being told you don’t have antibodies when you really do) could be just as bad as a false positive (being told you do have antibodies when you really don’t). Those errors are compounded when governments are trying to make evidence-based policies for social and physical distancing.

If you’re highly optimistic, high-quality testing will ramp up quickly as companies and scientists innovate rapidly by cleverly combining multiple test modalities, digital signals, and cutting-edge tech like CRISPR. Pop-up testing labs could also take some pressure off hospitals and clinics.

If things don’t go well, reliability issues could hinder testing, manufacturing bottlenecks could limit availability, and both could hamstring efforts to control spread and ease restrictions. And if it turns out that immunity to Covid-19 isn’t working the way we assumed, then we must revisit our assumptions about our path(s) back to public life, as well as our vaccine-development strategies.

How quickly safe and effective treatments appear
Drug development is known to be long, costly, and fraught with failure. It’s not uncommon to see hope in a drug spike early only to be dashed later on down the road. With that in mind, the number of treatments currently under investigation is astonishing, as is the speed through which they’re proceeding through testing. Breakthroughs in a therapeutic area—for example in treating the seriously ill or in reducing viral spread after an infection takes hold—could motivate changes in the focus of distancing regulations.

While speed will save lives, we cannot overlook the importance of knowing a treatment’s efficacy (does it work against Covid-19?) and safety (does it make you sick in a different, or worse, way?). Repurposing drugs that have already been tested for other diseases is speeding innovation here, as is artificial intelligence.

Remarkable collaborations among governments and companies, large and small, are driving innovation in therapeutics and devices such as ventilators for treating the sick.

Whether government policies are effective and responsive
Those of us who have experienced lockdown are eager for it to be over. Businesses, economists, and governments are also eager to relieve the terrible pressure that is being exerted on the global economy. However, lifting restrictions will almost certainly lead to a resurgence in sickness.

Here, the future is hard to model because there are many, many factors at play, and at play differently in different places—including the extent to which individuals actually comply with regulations.

Reliable testing—both in the clinic and at home—is crucial to designing and implementing restrictions, monitoring their effectiveness, and updating them; delays in reliable testing could seriously hamper this design cycle. Lack of trust in governments and/or companies could also suppress uptake. That said, systems are already in place for contact tracing in East Asia. Other governments could learn important lessons, but must also earn—and keep—their citizens’ trust.

Expect to see restrictions descend and then lift in response to changes in the number of Covid-19 cases and in the effectiveness of our prevention strategies. Also expect country-specific and perhaps even area-specific responses that differ from each other. The benefit of this approach? Governments around the world are running perhaps hundreds of real-time experiments and design cycles in balancing health and the economy, and we can learn from the results.

A Way Out
As Jeremy Farrar, head of the Wellcome Trust, told Science magazine, “Science is the exit strategy.” Some of our greatest technological assistance is coming from artificial intelligence, digital tools for collaboration, and advances in biotechnology.

Our exit strategy also needs to include empathy and future visioning—because in the midst of this crisis, we are breaking ground for a new, post-Covid future.

What do we want that future to look like? How will the hard choices we make now about data ethics impact the future of surveillance? Will we continue to embrace inclusiveness and mass collaboration? Perhaps most importantly, will we lay the foundation for successfully confronting future challenges? Whether we’re thinking about the next pandemic (and there will be others) or the cascade of catastrophes that climate change is bringing ever closer—it’s important to remember that we all have the power to become agents of that change.

Special thanks to Ola Kowalewski and Jason Dorrier for significant conversations.

Image Credit: Drew Beamer / Unsplash Continue reading

Posted in Human Robots

#436573 This Week’s Awesome Tech Stories From ...

ARTIFICIAL INTELLIGENCE
The Messy, Secretive Reality Behind OpenAI’s Bid to Save the World
Karen Hao | MIT Technology Review
“The AI moonshot was founded in the spirit of transparency. This is the inside story of how competitive pressure eroded that idealism. …Yet OpenAI is still a bastion of talent and cutting-edge research, filled with people who are sincerely striving to work for the benefit of humanity. In other words, it still has the most important elements, and there’s still time for it to change.”

ROBOTICS
3D Printed Four-Legged Robot Is Ready to Take on Spot—at a Lower Price
Luke Dormehl | Digital Trends
“[Ghost Robotics and Origin] have teamed up to develop a new line of robots, called the Spirit Series, which offer impressively capable four-legged robots, but which can be printed using additive manufacturing at a fraction of the cost and speed of traditional manufacturing approaches.”

PRIVACY
The Studs on This Punk Bracelet Are Actually Microphone-Jamming Ultrasonic Speakers
Andrew Liszewski | Gizmodo
“You can prevent facial recognition cameras from identifying you by wearing face paint, masks, or sometimes just a pair of oversized sunglasses. Keeping conversations private from an ever-growing number of microphone-equipped devices isn’t quite as easy, but researchers have created what could be the first wearable that actually helps increase your privacy.”

TRANSPORTATION
Iron Man Dreams Are Closer to Becoming a Reality Thanks to This New Jetman Dubai Video
Julia Alexander | The Verge
“Tony Stark may have destroyed his Iron Man suits in Iron Man 3 (only to bring out a whole new line in Avengers: Age of Ultron), but Jetman Dubai’s Iron Man-like dreams of autonomous human flight are realer than ever. A new video published by the company shows pilot Vince Reffet using a jet-powered, carbon-fiber suit to launch off the ground and fly 6,000 feet in the air.”

TECHNOLOGY
Wikipedia Is the Last Best Place on the Internet
Richard Cooke | Wired
“More than an encyclopedia, Wikipedia has become a community, a library, a constitution, an experiment, a political manifesto—the closest thing there is to an online public square. It is one of the few remaining places that retains the faintly utopian glow of the early World Wide Web.”

SCIENCE
The Very Large Array Will Search for Evidence of Extraterrestrial Life
Georgina Torbet | Digital Trends
“To begin the project, an interface will be added to the NRAO’s Very Large Array (VLA) in New Mexico to search for events or structures which could indicate the presence of life, such as laser beams, structures built around stars, indications of constructed satellites, or atmospheric chemicals produced by industry.”

SCIENCE FICTION
The Terrible Truth About Star Trek’s Transporters
Cassidy Ward | SyFy Wire
“The fact that you are scanned, deconstructed, and rebuilt almost immediately thereafter only creates the illusion of continuity. In reality, you are killed and then something exactly like you is born, elsewhere. There’s a whole philosophical debate about whether this really matters. If the person constructed on the other end is identical to you, down to the atomic level, is there any measurable difference from it being actually you?”

Image Credit: Samuel Giacomelli / Unsplash Continue reading

Posted in Human Robots

#436263 Skydio 2 Review: This Is the Drone You ...

Let me begin this review by saying that the Skydio 2 is one of the most impressive robots that I have ever seen. Over the last decade, I’ve spent enough time around robots to have a very good sense of what kinds of things are particularly challenging for them, and to set my expectations accordingly. Those expectations include things like “unstructured environments are basically impossible” and “full autonomy is impractically expensive” and “robot videos rarely reflect reality.”

Skydio’s newest drone is an exception to all of this. It’s able to fly autonomously at speed through complex environments in challenging real-world conditions in a way that’s completely effortless and stress-free for the end user, allowing you to capture the kind of video that would be otherwise impossible, even (I’m guessing) for professional drone pilots. When you see this technology in action, it’s (almost) indistinguishable from magic.

Skydio 2 Price
To be clear, the Skydio 2 is not without compromises, and the price of $999 (on pre-order with delivery of the next batch expected in spring of 2020) requires some justification. But the week I’ve had with this drone has left me feeling like its fundamental autonomous capability is so far beyond just about anything that I’ve ever experienced that I’m questioning why I would every fly anything else ever again.

We’ve written extensively about Skydio, beginning in early 2016 when the company posted a video of a prototype drone dodging trees while following a dude on a bike. Even three years ago, Skydio’s tech was way better than anything we’d seen outside of a research lab, and in early 2018, they introduced their first consumer product, the Skydio R1. A little over a year later, Skydio has introduced the Skydio 2, which is smaller, smarter, and much more affordable. Here’s an overview video just to get you caught up:

Skydio sent me a Skydio 2 review unit last week, and while I’m reasonably experienced with drones in general, this is the first time I’ve tried a Skydio drone in person. I had a pretty good idea what to expect, and I was absolutely blown away. Like, I was giggling to myself while running through the woods as the drone zoomed around, deftly avoiding trees and keeping me in sight. Robots aren’t supposed to be this good.

A week is really not enough time to explore everything that the Skydio can do, especially Thanksgiving week in Washington, D.C. (a no-fly zone) in early winter. But I found a nearby state park in which I could legally and safely fly the drone, and I did my best to put the Skydio 2 through its paces.

Note: Throughout this review, we’ve got a bunch of GIFs to help illustrate different features of the drone. To fit them all in, these GIFs had to be heavily compressed. Underneath each GIF is a timestamped link to this YouTube video (also available at the bottom of the post), which you can click on to see the an extended cut of the original 4K 30 fps footage. And there’s a bunch of interesting extra video in there as well.

Skydio 2 Specs

Photo: Evan Ackerman/IEEE Spectrum

The Skydio 2 is primarily made out of magnesium, which (while light) is both heavier and more rigid and durable than plastic. The offset props (the back pair are above the body, and the front pair are below) are necessary to maintain the field of view of the navigation cameras.

The Skydio 2 both looks and feels like a well-designed and carefully thought-out drone. It’s solid, and a little on the heavy side as far as drones go—it’s primarily made out of magnesium, which (while light) is both heavier and more rigid and durable than plastic. The blue and black color scheme is far more attractive than you typically see with drones.

Photo: Evan Ackerman/IEEE Spectrum

To detect and avoid obstacles, the Skydio 2 uses an array of six 4K hemispherical cameras that feed data into an NVIDIA Jetson TX2 at 30 fps, with the drone processing a million points in 3D space per second to plan the safest path.

The Skydio 2 is built around an array of six hemispherical obstacle-avoidance cameras and the NVIDIA Jetson TX2 computing module that they’re connected to. This defines the placement of the gimbal, the motors and props, and the battery, since all of this stuff has to be as much as possible out of the view of the cameras in order for the drone to effectively avoid obstacles in any direction.

Without the bottom-mounted battery attached, the drone is quite flat. The offset props (the back pair are above the body, and the front pair are below) are necessary to maintain the field of view of the obstacle-avoidance cameras. These hemispherical cameras are on the end of each of the prop arms as well as above and below the body of the drone. They look awfully exposed, even though each is protected from ground contact by a little fin. You need to make sure these cameras are clean and smudge-free, and Skydio includes a cleaning cloth for this purpose. Underneath the drone there are slots for microSD cards, one for recording from the camera and a second one that the drone uses to store data. The attention to detail extends to the SD card insertion, which has a sloped channel that guides the card securely into its slot.

Once you snap the battery in, the drone goes from looking streamlined to looking a little chubby. Relative to other drones, the battery almost seems like an afterthought, like Skydio designed the drone and then remembered, “oops we have to add a battery somewhere, let’s just kludge it onto the bottom.” But again, the reason for this is to leave room inside the body for the NVIDIA TX2, while making sure that the battery stays out of view of the obstacle avoidance cameras.

The magnetic latching system for the battery is both solid and satisfying. I’m not sure why it’s necessary, strictly speaking, but I do like it, and it doesn’t seem like the battery will fly off even during the most aggressive maneuvers. Each battery includes an LED array that will display its charge level in 25 percent increments, as well as a button that you push to turn the drone on and off. Charging takes place via a USB-C port in the top of the drone, which I don’t like, because it means that the batteries can’t be charged on their own (like the Parrot Anafi’s battery), and that you can’t charge one battery while flying with another, like basically every other drone ever. A separate battery charger that will charge two at once is available from Skydio for an eyebrow-raising $129.

I appreciate that all of Skydio’s stuff (batteries, controller, and beacon) charges via USB-C, though. The included USB-C adapter with its beefy cable will output at up to 65 watts, which’ll charge a mostly depleted battery in under an hour. The drone turns itself on while charging, which seems unnecessary.

Photo: Evan Ackerman/IEEE Spectrum

The Skydio 2 is not foldable, making it not nearly as easy to transport as some other drones. But it does come with a nice case that mitigates this issue somewhat, and the drone plus two batteries end up as a passably flat package about the size of a laptop case.

The most obvious compromise that Skydio made with the Skydio 2 is that the drone is not foldable. Skydio CEO Adam Bry told us that adding folding joints to the arms of the Skydio 2 would have made calibrating all six cameras a nightmare and significantly impacted performance. This makes complete sense, of course, but it does mean that the Skydio 2 is not nearly as easy to transport as some other drones.

Photo: Evan Ackerman/IEEE Spectrum

Folded and unfolded: The Skydio 2 compared to the Parrot Anafi (upper left) and the DJI Mavic Pro (upper right).

The Skydio 2 does come with a very nice case that mitigates this issue somewhat, and the drone plus two batteries end up as a passably flat package about the size of a laptop case. Still, it’s just not as convenient to toss into a backpack as my Anafi, although the Mavic Mini might be even more portable.

Photo: Evan Ackerman/IEEE Spectrum

While the Skydio 2’s case is relatively compact, the non-foldable drone is overall a significantly larger package than the Parrot Anafi.

The design of the drone leads to some other compromises as well. Since landing gear would, I assume, occlude the camera system, the drone lands directly on the bottom of its battery pack, which has a slightly rubberized pad about the size of a playing card. This does’t feel particularly stable unless you end up on a very flat surface, and made me concerned for the exposed cameras underneath the drone as well as the lower set of props. I’d recommend hand takeoffs and landings—more on those later.

Skydio 2 Camera System

Photo: Evan Ackerman/IEEE Spectrum

The Skydio 2’s primary camera is a Sony IMX577 1/2.3″ 12.3-megapixel CMOS sensor. It’s mounted to a three-axis gimbal and records 4K video at 60 fps, or 1080p video at 120 fps.

The Skydio 2 comes with a three-axis gimbal supporting a 12-megapixel camera, just enough to record 4K video at 60 fps, or 1080p video at 120 fps. Skydio has provided plenty of evidence that its imaging system is at least as good if not better than other drone cameras. Tested against my Mavic Pro and Parrot Anafi, I found no reason to doubt that. To be clear, I didn’t do exhaustive pixel-peeping comparisons between them, you’re just getting my subjective opinion that the Skydio 2 has a totally decent camera that you won’t be disappointed with. I will say that I found the HDR photo function to be not all that great under the few situations in which I tested it—after looking at a few muddy sunset shots, I turned it off and was much happier.

Photo: Evan Ackerman/IEEE Spectrum

The Skydio 2’s 12-megapixel camera is solid, although we weren’t impressed with the HDR option.

The video stabilization is fantastic, to the point where watching the video footage can be underwhelming because it doesn’t reflect the motion of the drone. I almost wish there was a way to change to unstabilized (or less-stabilized) video so that the viewer could get a little more of a wild ride. Or, ideally, there’d be a way for the drone to provide you with a visualization of what it was doing using the data collected by its cameras. That’s probably wishful thinking, though. The drone itself doesn’t record audio because all you’d get would be an annoying buzz, but the app does record audio, so the audio from your phone gets combined with the drone video. Don’t expect great quality, but it’s better than nothing.

Skydio 2 App
The app is very simple compared to every other drone app I’ve tried, and that’s a good thing. Here’s what it looks like:

Image: Skydio

Trackable subjects get a blue “+” sign over them, and if you tap them, the “+” turns into a spinny blue circle. Once you’ve got a subject selected, you can choose from a variety of cinematic skills that the drone will execute while following you.

You get the controls that you need and the information that you need, and nothing else. Manual flight with the on-screen buttons works adequately, and the double-tap to fly function on the phone works surprisingly well, making it easy to direct the drone to a particular spot above the ground.

The settings menus are limited but functional, allowing you to change settings for the camera and a few basic tweaks for controlling the drone. One unique setting to the Skydio 2 is the height floor—since the drone only avoids static obstacles, you can set it to maintain a height of at least 8 feet above the ground while flying autonomously to make sure that if you’re flying around other people, it won’t run into anyone who isn’t absurdly tall and therefore asking for it.

Trackable subjects get a blue “+” sign over them in the app, and if you tap them, the “+” turns into a spinny blue circle. Once you’ve got a subject selected, you can choose from a variety of cinematic skills that the drone will execute while following you, and in addition, you can select “one-shot” skills that involve the drone performing a specific maneuver before returning to the previously selected cinematic skill. For example, you can tell the drone to orbit around you, and then do a “rocket” one-shot where it’ll fly straight up above you (recording the whole time, of course), before returning to its orbiting.

After you’re done flying, you can scroll through your videos and easily clip out excerpts from them and save them to your phone for sharing. Again, it’s a fairly simple interface without a lot of options. You could call it limited, I guess, but I appreciate that it just does a few things that you care about and otherwise doesn’t clutter itself up.

The real limitation of the app is that it uses Wi-Fi to connect to the Skydio 2, which restricts the range. To fly much beyond a hundred meters or so, you’ll need to use the controller or beacon instead.

Skydio 2 Controller and Beacon

Photo: Evan Ackerman/IEEE Spectrum

While the Skydio 2 controller provides a better hands-on flight experience than with the phone, plus an extended range of up to 3.5 km, more experienced pilots may find manual control a bit frustrating, because the underlying autonomy will supersede your maneuvers when you start getting close to objects.

I was looking forward to using the controller, because with every other drone I’ve had, the precision that a physically controller provides is, I find, mandatory for a good flying experience and to get the photos and videos that you want. With Skydio 2, that’s all out the window. It’s not that the controller is useless or anything, it’s just that because the drone tracks you and avoids obstacles on its own, that level of control precision becomes largely unnecessary.

The controller itself is perfectly fine. It’s a rebranded Parrot Skycontroller3, which is the same as the one that you get with a Parrot Anafi. It’s too bad that the sticks don’t unscrew to make it a little more portable, and overall it’s functional rather than fancy, but it feels good to use and includes a sizeable antenna that makes a significant difference to the range that you get (up to 3.5 kilometers).

You definitely get a better hands-on flight experience with the controller than with the phone, so if you want to (say) zip the drone around some big open space for fun, it’s good for that. And it’s nice to be able to hand the controller to someone who’s never flown a drone before and let them take it for a spin without freaking out about them crashing it the whole time. For more experienced pilots, though, the controller is ultimately just a bit frustrating, because the underlying autonomy will supersede your control when you start getting close to objects, which (again) limits how useful the controller is relative to your phone.

I do still prefer the controller over the phone, but I’m not sure that it’s worth the extra $150, unless you plan to fly the Skydio 2 at very long distances or primarily in manual mode. And honestly, if either of those two things are your top priority, the Skydio 2 is probably not the drone for you.

Photo: Evan Ackerman/IEEE Spectrum

The Skydio 2 beacon uses GPS tracking to help the drone follow you, extending range up to 1.5 km. You can also fly the with the beacon alone, no phone necessary.

The purpose of the beacon, according to Skydio, is to give the drone a way of tracking you if it can’t see you, which can happen, albeit infrequently. My initial impression of the beacon was that it was primarily useful as a range-extending bridge between my phone and the drone. But I accidentally left my phone at home one day (oops) and had to fly the drone with only the beacon, and it was a surprisingly decent experience. The beacon allows for full manual control of a sort—you can tap different buttons to rotate, fly forward, and ascend or descend. This is sufficient for takeoff, landing, to make sure that the drone is looking at you when you engage visual tracking, and to rescue it if it gets trapped somewhere.

The rest of the beacon’s control functions are centered around a few different tracking modes, and with these, it works just about as well as your phone. You have fewer options overall, but all the basic stuff is there with just a few intuitive button clicks, including tracking range and angle. If you’re willing to deal with this relatively minor compromise, it’s nice to not have your phone available for other things rather than being monopolized by the drone.

Skydio 2 In Flight

GIF: Evan Ackerman/IEEE Spectrum

Hand takeoffs are simple and reliable.
Click here for a full resolution clip.

Starting up the Skydio 2 doesn’t require any kind of unusual calibration steps or anything like that. It prefers to be kept still, but you can start it up while holding it, it’ll just take a few seconds longer to tell you that it’s ready to go. While the drone will launch from any flat surface with significant clearance around it (it’ll tell you if it needs more room), the small footprint of the battery means that I was more comfortable hand launching it. This is not a “throw” launch; you just let the drone rest on your palm, tell it to take off, and then stay still while it gets its motors going and then gently lifts off. The lift off is so gentle that you have to be careful not to pull your hand away too soon—I did that once and the drone, being not quite ready, dropped towards the ground, but managed to recover without much drama.

GIF: Evan Ackerman/IEEE Spectrum

Hand landings always look scary, but the Skydio 2 is incredibly gentle. After trying this once, it became the only way I ever landed the drone.
Click here for a full resolution clip.

Catching the drone for landing is perhaps very slightly more dangerous, but not any more difficult. You put the drone above and in front of you facing away, tell it to land in the app or with the beacon, and then put your hand underneath it to grasp it as it slowly descends. It settles delicately and promptly turns itself off. Every drone should land this way. The battery pack provides a good place to grip, although you do have to be mindful of the forward set of props, which (since they’re the pair that are beneath the body of drone) are quite close to your fingers. You’ll certainly be mindful after you catch a blade with your fingers once. Which I did. For the purposes of this review and totally not by accident. No damage, for the record.

Photo: Evan Ackerman/IEEE Spectrum

You won’t be disappointed with the Skydio 2’s in-flight performance, unless you’re looking for a dedicated racing drone.

In normal flight, the Skydio 2 performs as well as you’d expect. It’s stable and manages light to moderate wind without any problems, although I did notice some occasional lateral drifting when the drone should have been in a stationary hover. While the controller gains are adjustable, the Skydio 2 isn’t quite as aggressive in flight as my Mavic Pro on Sport Mode, but again, if you’re looking for a high-speed drone, that’s really not what the Skydio is all about.

The Skydio 2 is substantially louder than my Anafi, although the Anafi is notably quiet for a drone. It’s not annoying to hear (not a high-pitched whine), but you can hear it from a ways away, and farther away than my Mavic Pro. I’m not sure whether that’s because of the absolute volume or the volume plus the pitch. In some ways, this is a feature, since you can hear the drone following you even if you’re not looking at it, you just need to be aware of the noise it makes when you’re flying it around people.

Obstacle Avoidance
The primary reason Skydio 2 is the drone that you want to fly is because of its autonomous subject tracking and obstacle avoidance. Skydio’s PR videos make this capability look almost too good, and since I hadn’t tried out one of their drones before, the first thing I did with it was exactly what you’d expect: attempt to fly it directly into the nearest tree.

GIF: Evan Ackerman/IEEE Spectrum

The Skydio 2 deftly slides around trees and branches. The control inputs here were simple “forward” or “turn,” all obstacle avoidance is autonomous.
Click here for a full resolution clip.

And it just won’t do it. It slows down a bit, and then slides right around one tree after another, going over and under and around branches. I pointed the drone into a forest and just held down “forward” and away it went, without any fuss, effortlessly ducking and weaving its way around. Of course, it wasn’t effortless at all—six 4K cameras were feeding data into the NVIDIA TX2 at 30 fps, and the drone was processing a million points in 3D space per second to plan the safest path while simultaneously taking into account where I wanted it to go. I spent about 10 more minutes doing my level best to crash the drone into anything at all using a flying technique probably best described as “reckless,” but the drone was utterly unfazed. It’s incredible.

What knocked my socks off was telling the drone to pass through treetops—in the clip below, I’m just telling the drone to fly straight down. Watch as it weaves its way through gaps between the branches:

GIF: Evan Ackerman/IEEE Spectrum

The result of parking the Skydio 2 above some trees and holding “down” on the controller is this impressive fully autonomous descent through the branches.
Click here for a full resolution clip.

Here’s one more example, where I sent the drone across a lake and started poking around in a tree. Sometimes the Skydio 2 isn’t sure where you want it to go, and you have to give it a little bit of a nudge in a clear direction, but that’s it.

GIF: Evan Ackerman/IEEE Spectrum

In obstacle-heavy environments, the Skydio 2 prudently slows down, but it can pick its way through almost anything that it can see.
Click here for a full resolution clip.

It’s important to keep in mind that all of the Skydio 2’s intelligence is based on vision. It uses cameras to see the world, which means that it has similar challenges as your eyes do. Specifically, Skydio warns against flying in the following conditions:

Skydio 2 can’t see certain visually challenging obstacles. Do not fly around thin branches, telephone or power lines, ropes, netting, wires, chain link fencing or other objects less than ½ inch in diameter.
Do not fly around transparent surfaces like windows or reflective surfaces like mirrors greater than 60 cm wide.
When the sun is low on the horizon, it can temporarily blind Skydio 2’s cameras depending on the angle of flight. Your drone may be cautious or jerky when flying directly toward the sun.

Basically, if you’d have trouble seeing a thing, or seeing under some specific flight conditions, then the Skydio 2 almost certainly will also. It gets even more problematic when challenging obstacles are combined with challenging flight conditions, which is what I’m pretty sure led to the only near-crash I had with the drone. Here’s a video:

GIF: Evan Ackerman/IEEE Spectrum

Flying around very thin branches and into the sun can cause problems for the Skydio 2’s obstacle avoidance.
Click here for a full resolution clip.

I had the Skydio 2 set to follow me on my bike (more about following and tracking in a bit). It was mid afternoon, but since it’s late fall here in Washington, D.C., the sun doesn’t get much higher than 30 degrees above the horizon. Late fall also means that most of the deciduous trees have lost their leaves, and so there are a bunch of skinny branches all over the place. The drone was doing a pretty good job of following me along the road at a relatively slow speed, and then it clipped the branch that you can just barely see in the video above. It recovered in an acrobatic maneuver that has been mostly video-stabilized out, and resumed tracking me before I freaked and told it to land. You can see another example here, where the drone (again) clips a branch that has the sun behind it, and this clip shows me stopping my bike before the drone runs into another branch in a similar orientation. As the video shows, it’s very hard to see the branches until it’s too late.

As far as I can tell, the drone is no worse for wear from any of this, apart from a small nick in one of the props. But, this is a good illustration of a problematic situation for the Skydio 2: flying into a low sun angle around small bare branches. Should I not have been flying the drone in this situation? It’s hard to say. These probably qualify as “thin branches,” although there was plenty of room along with middle of the road. There is an open question with the Skydio 2 as to exactly how much responsibility the user should have about when and where it’s safe to fly—for branches, how thin is too thin? How low can the sun be? What if the branches are only kinda thin and the sun is only kinda low, but it’s also a little windy? Better to be safe than sorry, of course, but there’s really no way for the user (or the drone) to know what it can’t handle until it can’t handle it.

Edge cases like these aside, the obstacle avoidance just works. Even if you’re not deliberately trying to fly into branches, it’s keeping a lookout for you all the time, which means that flying the drone goes from somewhat stressful to just pure fun. I can’t emphasize enough how amazing it is to be able to fly without worrying about running into things, and how great it feels to be able to hand the controller to someone who’s never flown a drone before and say, with complete confidence, “go ahead, fly it around!”

Skydio 2 vs. DJI Mavic

Photo: Evan Ackerman/IEEE Spectrum

Both the Skydio 2 and many models of DJI’s Mavic use visual obstacle avoidance, but the Skydio 2 is so much more advanced that you can’t really compare the two systems.

It’s important to note that there’s a huge difference between the sort of obstacle avoidance that you get with a DJI Mavic, and the sort of obstacle avoidance that you get with the Skydio 2. The objective of the Mavic’s obstacle avoidance is really there to prevent you from accidentally running into things, and in that capacity, it usually works. But there are two things to keep in mind here—first, not running into things is not the same as avoiding things, because avoiding things means planning several steps ahead, not just one step.

Second, there’s the fact that the Mavic’s obstacle detection only works most of the time. Fundamentally, I don’t trust my Mavic Pro, because sometimes the safety system doesn’t kick in for whatever reason and the drone ends up alarmingly close to something. And that’s actually fine, because with the Mavic, I expect to be piloting it. It’s for this same reason that I don’t care that my Parrot Anafi doesn’t have obstacle avoidance at all: I’m piloting it anyway, and I’m a careful pilot, so it just doesn’t matter. The Skydio 2 is totally and completely different. It’s in a class by itself, and you can’t compare what it can do to what anything else out there right now. Period.

Skydio 2 Tracking
Skydio’s big selling point on the Skydio 2 is that it’ll autonomously track you while avoiding obstacles. It does this visually, by watching where you go, predicting your future motion, and then planning its own motion to keep you in frame. The works better than you might expect, in that it’s really very good at not losing you. Obviously, the drone prioritizes not running into stuff over tracking you, which means that it may not always be where you feel like it should be. It’s probably trying to get there, but in obstacle dense environments, it can take some creative paths.

Having said that, I found it to be very consistent with keeping me in the frame, and I only managed to lose it when changing direction while fully occluded by an obstacle, or while it was executing an avoidance maneuver that was more dynamic than normal. If you deliberately try to hide from the drone it’s not that hard to do so if there are enough obstacles around, but I didn’t find the tracking to be something that I had to worry about it most cases. When tracking does fail and you’re not using the beacon, the drone will come to a hover. It won’t try and find you, but it will reacquire you if you get back into its field of view.

The Skydio 2 had no problem tracking me running through fairly dense trees:

GIF: Evan Ackerman/IEEE Spectrum

The Skydio 2 had no problem chasing me around through these trees, even while I was asking it to continually change its tracking angle.
Click here for a full resolution clip.

It also managed to keep up with me as I rode my bike along a tree-lined road:

GIF: Evan Ackerman/IEEE Spectrum

The Skydio 2 is easily fast enough to keep up with me on a bike, even while avoiding tree branches.
Click here for a full resolution clip.

It lost me when I asked it to follow very close behind me as I wove through some particularly branch-y trees, but it fails more or less gracefully by just sort of nope-ing out of situations when they start to get bad and coming to a hover somewhere safe.

GIF: Evan Ackerman/IEEE Spectrum

The Skydio 2 knows better than to put itself into situations that it can’t handle, and will bail to a safe spot if things get too complicated.
Click here for a full resolution clip.

After a few days of playing with the drone, I started to get to the point where I could set it to track me and then just forget about it while I rode my bike or whatever, as opposed to constantly turning around to make sure it was still behind me, which is what I was doing initially. It’s a level of trust that I don’t think would be possible with any other drone.

Should You Buy a Skydio 2?

Photo: Evan Ackerman/IEEE Spectrum

We think the Skydio 2 is fun and relaxing to fly, with unique autonomous intelligence that makes it worth the cost.

In case I haven’t said it often enough in this review, the Skydio 2 is an incredible piece of technology. As far as I know (as a robotics journalist, mind you), this represents the state of the art in commercial drone autonomy, and quite possibly the state of the art in drone autonomy, period. And it’s available for $999, which is expensive, but less money than a Mavic Pro 2. If you’re interested in a new drone, you should absolutely consider the Skydio 2.

There are some things to keep in mind—battery life is a solid but not stellar 20 minutes. Extra batteries are expensive at $99 each (the base kit includes just one). The controller and the beacon are also expensive, at $150 each. And while I think the Skydio 2 is definitely the drone you want to fly, it may not be the drone you want to travel with, since it’s bulky compared to other options.

But there’s no denying the fact that the experience is uniquely magical. Once you’ve flown the Skydio 2, you won’t want to fly anything else. This drone makes it possible to get pictures and videos that would be otherwise impossible, and you can do it completely on your own. You can trust the drone to do what it promises, as long as you’re mindful of some basic and common sense safety guidelines. And we’ve been told that the drone is only going to get smarter and more capable over time.

If you buy a Skydio 2, it comes with the following warranty from Skydio:

“If you’re operating your Skydio 2 within our Safe Flight guidelines, and it crashes, we’ll repair or replace it for free.”

Skydio trusts their drone to go out into a chaotic and unstructured world and dodge just about anything that comes its way. And after a week with this drone, I can see how they’re able to offer this kind of guarantee. This is the kind of autonomy that robots have been promising for years, and the Skydio 2 makes it real.

Detailed technical specifications are available on Skydio’s website, and if you have any questions, post a comment—we’ve got this drone for a little while longer, and I’d be happy to try out (nearly) anything with it.

Skydio 2 Review Video Highlights
This video is about 7 minutes of 4K, 30 fps footage directly from the Skydio 2. The only editing I did was cutting clips together, no stabilization or color correcting or anything like that. The drone will record in 4K 60 fps, so it gets smoother than this, but I, er, forgot to change the setting.

[ Skydio ] Continue reading

Posted in Human Robots

#436256 Alphabet Is Developing a Robot to Take ...

Robots excel at carrying out specialized tasks in controlled environments, but put them in your average office and they’d be lost. Alphabet wants to change that by developing what they call the Everyday Robot, which could learn to help us out with our daily chores.

For a long time most robots were painstakingly hand-coded to carry out their functions, but since the deep learning revolution earlier this decade there’s been a growing effort to imbue them with AI that lets them learn new tasks through experience.

That’s led to some impressive breakthroughs, like a robotic hand nimble enough to solve a Rubik’s cube and a robotic arm that can accurately toss bananas across a room.

And it turns out Alphabet’s early-stage research and development division, Alphabet X, has also secretly been using similar machine learning techniques to develop robots adaptable enough to carry out a range of tasks in cluttered and unpredictable human environments like homes and offices.

The robots they’ve built combine a wheeled base with a single arm and a head full of sensors (including LIDAR) for 3D scanning, borrowed from Alphabet’s self-driving car division, Waymo.

At the minute, though, they’re largely restricted to sorting trash for recycling, project leader Hans Peter Brondmo writes in a blog post. While that might sound mundane, identifying different kinds of trash, grasping it, and moving it to the correct bin is still a difficult thing for a robot to do consistently. Some of the robots also have to navigate around the office to sort trash at various recycling stations.

Alphabet says even its human staff were getting it wrong 20 percent of the time, but after several months of training the robots have managed to get that down to 3.5 percent.

Every day, 30 robots toil away in what’s been dubbed the “playpen” sorting trash, and then every night thousands of virtual robots continue to practice in a simulation. This experience is then used to update the robots’ control algorithms each night. All the robots also share their experiences with the others through a process called collaborative learning.

The process isn’t flawless, though. Simonite notes that while the robots exhibit some uncannily smart behaviors, like stirring piles of rubbish to make it easier to grab specific items, they also frequently miss or fumble the objects they’re trying to grasp.

Nonetheless, the project’s leaders are happy with their progress so far. And the hope is that creating robots that are able to learn from little more than experience in complex environments like an office should be a first step towards general-purpose robots that can pick up a variety of useful skills to assist humans.

Taking that next step will be the major test of the project. So far there’s been limited evidence that experience gained by robots in one task can be transferred to learning another. That’s something the group hopes to demonstrate next year.

And it seems there may be more robot news coming out of Alphabet X soon. The group has several other robotics “moonshots” in the pipeline, built on technology and talent transferred over in 2016 from the remains of a broadly unsuccessful splurge on robotics startups by former Google executive Andy Rubin.

Whether this robotics renaissance at Alphabet will finally help robots break into our homes and offices remains to be seen, but with the resources they have at hand, they just may be able to make it happen.

Image Credit: Everyday Robot, Alphabet X Continue reading

Posted in Human Robots

#436123 A Path Towards Reasonable Autonomous ...

Editor’s Note: The debate on autonomous weapons systems has been escalating over the past several years as the underlying technologies evolve to the point where their deployment in a military context seems inevitable. IEEE Spectrum has published a variety of perspectives on this issue. In summary, while there is a compelling argument to be made that autonomous weapons are inherently unethical and should be banned, there is also a compelling argument to be made that autonomous weapons could potentially make conflicts less harmful, especially to non-combatants. Despite an increasing amount of international attention (including from the United Nations), progress towards consensus, much less regulatory action, has been slow. The following workshop paper on autonomous weapons systems policy is remarkable because it was authored by a group of experts with very different (and in some cases divergent) views on the issue. Even so, they were able to reach consensus on a roadmap that all agreed was worth considering. It’s collaborations like this that could be the best way to establish a reasonable path forward on such a contentious issue, and with the permission of the authors, we’re excited to be able to share this paper (originally posted on Georgia Tech’s Mobile Robot Lab website) with you in its entirety.

Autonomous Weapon Systems: A Roadmapping Exercise
Over the past several years, there has been growing awareness and discussion surrounding the possibility of future lethal autonomous weapon systems that could fundamentally alter humanity’s relationship with violence in war. Lethal autonomous weapons present a host of legal, ethical, moral, and strategic challenges. At the same time, artificial intelligence (AI) technology could be used in ways that improve compliance with the laws of war and reduce non-combatant harm. Since 2014, states have come together annually at the United Nations to discuss lethal autonomous weapons systems1. Additionally, a growing number of individuals and non-governmental organizations have become active in discussions surrounding autonomous weapons, contributing to a rapidly expanding intellectual field working to better understand these issues. While a wide range of regulatory options have been proposed for dealing with the challenge of lethal autonomous weapons, ranging from a preemptive, legally binding international treaty to reinforcing compliance with existing laws of war, there is as yet no international consensus on a way forward.

The lack of an international policy consensus, whether codified in a formal document or otherwise, poses real risks. States could fall victim to a security dilemma in which they deploy untested or unsafe weapons that pose risks to civilians or international stability. Widespread proliferation could enable illicit uses by terrorists, criminals, or rogue states. Alternatively, a lack of guidance on which uses of autonomy are acceptable could stifle valuable research that could reduce the risk of non-combatant harm.

International debate thus far has predominantly centered around whether or not states should adopt a preemptive, legally-binding treaty that would ban lethal autonomous weapons before they can be built. Some of the authors of this document have called for such a treaty and would heartily support it, if states were to adopt it. Other authors of this document have argued an overly expansive treaty would foreclose the possibility of using AI to mitigate civilian harm. Options for international action are not binary, however, and there are a range of policy options that states should consider between adopting a comprehensive treaty or doing nothing.

The purpose of this paper is to explore the possibility of a middle road. If a roadmap could garner sufficient stakeholder support to have significant beneficial impact, then what elements could it contain? The exercise whose results are presented below was not to identify recommendations that the authors each prefer individually (the authors hold a broad spectrum of views), but instead to identify those components of a roadmap that the authors are all willing to entertain2. We, the authors, invite policymakers to consider these components as they weigh possible actions to address concerns surrounding autonomous weapons3.

Summary of Issues Surrounding Autonomous Weapons

There are a variety of issues that autonomous weapons raise, which might lend themselves to different approaches. A non-exhaustive list of issues includes:

The potential for beneficial uses of AI and autonomy that could improve precision and reliability in the use of force and reduce non-combatant harm.
Uncertainty about the path of future technology and the likelihood of autonomous weapons being used in compliance with the laws of war, or international humanitarian law (IHL), in different settings and on various timelines.
A desire for some degree of human involvement in the use of force. This has been expressed repeatedly in UN discussions on lethal autonomous weapon systems in different ways.
Particular risks surrounding lethal autonomous weapons specifically targeting personnel as opposed to vehicles or materiel.
Risks regarding international stability.
Risk of proliferation to terrorists, criminals, or rogue states.
Risk that autonomous systems that have been verified to be acceptable can be made unacceptable through software changes.
The potential for autonomous weapons to be used as scalable weapons enabling a small number of individuals to inflict very large-scale casualties at low cost, either intentionally or accidentally.

Summary of Components

A time-limited moratorium on the development, deployment, transfer, and use of anti-personnel lethal autonomous weapon systems4. Such a moratorium could include exceptions for certain classes of weapons.
Define guiding principles for human involvement in the use of force.
Develop protocols and/or technological means to mitigate the risk of unintentional escalation due to autonomous systems.
Develop strategies for preventing proliferation to illicit uses, such as by criminals, terrorists, or rogue states.
Conduct research to improve technologies and human-machine systems to reduce non-combatant harm and ensure IHL compliance in the use of future weapons.

Component 1:

States should consider adopting a five-year, renewable moratorium on the development, deployment, transfer, and use of anti-personnel lethal autonomous weapon systems. Anti-personnel lethal autonomous weapon systems are defined as weapons systems that, once activated, can select and engage dismounted human targets without further intervention by a human operator, possibly excluding systems such as:

Fixed-point defensive systems with human supervisory control to defend human-occupied bases or installations
Limited, proportional, automated counter-fire systems that return fire in order to provide immediate, local defense of humans
Time-limited pursuit deterrent munitions or systems
Autonomous weapon systems with size above a specified explosive weight limit that select as targets hand-held weapons, such as rifles, machine guns, anti-tank weapons, or man-portable air defense systems, provided there is adequate protection for non-combatants and ensuring IHL compliance5

The moratorium would not apply to:

Anti-vehicle or anti-materiel weapons
Non-lethal anti-personnel weapons
Research on ways of improving autonomous weapon technology to reduce non-combatant harm in future anti-personnel lethal autonomous weapon systems
Weapons that find, track, and engage specific individuals whom a human has decided should be engaged within a limited predetermined period of time and geographic region

Motivation:

This moratorium would pause development and deployment of anti-personnel lethal autonomous weapons systems to allow states to better understand the systemic risks of their use and to perform research that improves their safety, understandability, and effectiveness. Particular objectives could be to:

ensure that, prior to deployment, anti-personnel lethal autonomous weapons can be used in ways that are equal to or outperform humans in their compliance with IHL (other conditions may also apply prior to deployment being acceptable);
lay the groundwork for a potentially legally binding diplomatic instrument; and
decrease the geopolitical pressure on countries to deploy anti-personnel lethal autonomous weapons before they are reliable and well-understood.

Compliance Verification:

As part of a moratorium, states could consider various approaches to compliance verification. Potential approaches include:

Developing an industry cooperation regime analogous to that mandated under the Chemical Weapons Convention, whereby manufacturers must know their customers and report suspicious purchases of significant quantities of items such as fixed-wing drones, quadcopters, and other weaponizable robots.
Encouraging states to declare inventories of autonomous weapons for the purposes of transparency and confidence-building.
Facilitating scientific exchanges and military-to-military contacts to increase trust, transparency, and mutual understanding on topics such as compliance verification and safe operation of autonomous systems.
Designing control systems to require operator identity authentication and unalterable records of operation; enabling post-hoc compliance checks in case of plausible evidence of non-compliant autonomous weapon attacks.
Relating the quantity of weapons to corresponding capacities for human-in-the-loop operation of those weapons.
Designing weapons with air-gapped firing authorization circuits that are connected to the remote human operator but not to the on-board automated control system.
More generally, avoiding weapon designs that enable conversion from compliant to non-compliant categories or missions solely by software updates.
Designing weapons with formal proofs of relevant properties—e.g., the property that the weapon is unable to initiate an attack without human authorization. Proofs can, in principle, be provided using cryptographic techniques that allow the proofs to be checked by a third party without revealing any details of the underlying software.
Facilitate access to (non-classified) AI resources (software, data, methods for ensuring safe operation) to all states that remain in compliance and participate in transparency activities.

Component 2:

Define and universalize guiding principles for human involvement in the use of force.

Humans, not machines, are legal and moral agents in military operations.
It is a human responsibility to ensure that any attack, including one involving autonomous weapons, complies with the laws of war.
Humans responsible for initiating an attack must have sufficient understanding of the weapons, the targets, the environment and the context for use to determine whether that particular attack is lawful.
The attack must be bounded in space, time, target class, and means of attack in order for the determination about the lawfulness of that attack to be meaningful.
Militaries must invest in training, education, doctrine, policies, system design, and human-machine interfaces to ensure that humans remain responsible for attacks.

Component 3:

Develop protocols and/or technological means to mitigate the risk of unintentional escalation due to autonomous systems.

Specific potential measures include:

Developing safe rules for autonomous system behavior when in proximity to adversarial forces to avoid unintentional escalation or signaling. Examples include:

No-first-fire policy, so that autonomous weapons do not initiate hostilities without explicit human authorization.
A human must always be responsible for providing the mission for an autonomous system.
Taking steps to clearly distinguish exercises, patrols, reconnaissance, or other peacetime military operations from attacks in order to limit the possibility of reactions from adversary autonomous systems, such as autonomous air or coastal defenses.

Developing resilient communications links to ensure recallability of autonomous systems. Additionally, militaries should refrain from jamming others’ ability to recall their autonomous systems in order to afford the possibility of human correction in the event of unauthorized behavior.

Component 4:

Develop strategies for preventing proliferation to illicit uses, such as by criminals, terrorists, or rogue states:

Targeted multilateral controls to prevent large-scale sale and transfer of weaponizable robots and related military-specific components for illicit use.
Employ measures to render weaponizable robots less harmful (e.g., geofencing; hard-wired kill switch; onboard control systems largely implemented in unalterable, non-reprogrammable hardware such as application-specific integrated circuits).

Component 5:

Conduct research to improve technologies and human-machine systems to reduce non-combatant harm and ensure IHL-compliance in the use of future weapons, including:

Strategies to promote human moral engagement in decisions about the use of force
Risk assessment for autonomous weapon systems, including the potential for large-scale effects, geopolitical destabilization, accidental escalation, increased instability due to uncertainty about the relative military balance of power, and lowering thresholds to initiating conflict and for violence within conflict
Methodologies for ensuring the reliability and security of autonomous weapon systems
New techniques for verification, validation, explainability, characterization of failure conditions, and behavioral specifications.

About the Authors (in alphabetical order)

Ronald Arkin directs the Mobile Robot Laboratory at Georgia Tech.

Leslie Kaelbling is co-director of the Learning and Intelligent Systems Group at MIT.

Stuart Russell is a professor of computer science and engineering at UC Berkeley.

Dorsa Sadigh is an assistant professor of computer science and of electrical engineering at Stanford.

Paul Scharre directs the Technology and National Security Program at the Center for a New American Security (CNAS).

Bart Selman is a professor of computer science at Cornell.

Toby Walsh is a professor of artificial intelligence at the University of New South Wales (UNSW) Sydney.

The authors would like to thank Max Tegmark for organizing the three-day meeting from which this document was produced.

1 Autonomous Weapons System (AWS): A weapon system that, once activated, can select and engage targets without further intervention by a human operator. BACK TO TEXT↑

2 There is no implication that some authors would not personally support stronger recommendations. BACK TO TEXT↑

3 For ease of use, this working paper will frequently shorten “autonomous weapon system” to “autonomous weapon.” The terms should be treated as synonymous, with the understanding that “weapon” refers to the entire system: sensor, decision-making element, and munition. BACK TO TEXT↑

4 Anti-personnel lethal autonomous weapon system: A weapon system that, once activated, can select and engage dismounted human targets with lethal force and without further intervention by a human operator. BACK TO TEXT↑

5 The authors are not unanimous about this item because of concerns about ease of repurposing for mass-casualty missions targeting unarmed humans. The purpose of the lower limit on explosive payload weight would be to minimize the risk of such repurposing. There is precedent for using explosive weight limit as a mechanism of delineating between anti-personnel and anti-materiel weapons, such as the 1868 St. Petersburg Declaration Renouncing the Use, in Time of War, of Explosive Projectiles Under 400 Grammes Weight. BACK TO TEXT↑ Continue reading

Posted in Human Robots