Tag Archives: developing

#430556 Forget Flying Cars, the Future Is ...

Posted on July 3, 2017 by Android

Flying car concepts have been around nearly as long as their earthbound cousins, but no one has yet made them a commercial success. MIT engineers think we’ve been coming at the problem from the wrong direction; rather than putting wings on cars, we should be helping drones to drive.
The team from the university’s Computer Science and Artificial Intelligence Laboratory (CSAIL) added wheels to a fleet of eight mini-quadcopters and tested driving and flying them around a tiny toy town made out of cardboard and fabric.
Adding the ability to drive reduced the distance the drone could fly by 14 percent compared to a wheel-less version. But while driving was slower, the drone could travel 150 percent further than when flying. The result is a vehicle that combines the speed and mobility of flying with the energy-efficiency of driving.

CSAIL director Daniela Rus told MIT News their work suggested that when looking to create flying cars, it might make more sense to build on years of research into drones rather than trying to simply “put wings on cars.”
Historically, flying car concepts have looked like someone took apart a Cessna light aircraft and a family sedan, mixed all the parts up, and bolted them back together again. Not everyone has abandoned this approach—two of the most developed flying car designs from Terrafugia and AeroMobil are cars with folding wings that need an airstrip to take off.
But flying car concepts are looking increasingly drone-like these days, with multiple small rotors, electric propulsion and vertical take-off abilities. Take the eHang 184 autonomous aerial vehicle being developed in China, the Kitty Hawk all-electric aircraft backed by Google founder Larry Page, which is little more than a quadcopter with a seat, the AirQuadOne designed by UK consortium Neva Aerospace, or Lilium Aviation’s Jet.
The attraction is obvious. Electric-powered drones are more compact, maneuverable, and environmentally friendly, making them suitable for urban environments.
Most of these vehicles are not quite the same as those proposed by the MIT engineers, as they’re pure flying machines. But a recent Airbus concept builds on the same principle that the future of urban mobility is vehicles that can both fly and drive. Its Pop.Up design is a two-passenger pod that can either be clipped to a set of wheels or hang under a quadcopter.
Importantly, they envisage their creation being autonomous in both flight and driving modes. And they’re not the only ones who think the future of flying cars is driverless. Uber has committed to developing a network of autonomous air taxis within a decade. This spring, Dubai announced it would launch a pilotless passenger drone service using the Ehang 184 as early as next month (July).
While integrating fully-fledged autonomous flying cars into urban environments will be far more complex, the study by Rus and her colleagues provides a good starting point for the kind of 3D route-planning and collision avoidance capabilities this would require.
The team developed multi-robot path planning algorithms that were able to control all eight drones as they flew and drove around their mock up city, while also making sure they didn’t crash into each other and avoided no-fly zones.
“This work provides an algorithmic solution for large-scale, mixed-mode transportation and shows its applicability to real-world problems,” Jingjin Yu, a computer science professor at Rutgers University who was not involved in the research, told MIT News.
This vision of a driverless future for flying cars might be a bit of a disappointment for those who’d envisaged themselves one day piloting their own hover car just like George Jetson. But autonomy and Uber-like ride-hailing business models are likely to be attractive, as they offer potential solutions to three of the biggest hurdles drone-like passenger vehicles face.
Firstly, it makes the vehicles accessible to anyone by removing the need to learn how to safely pilot an aircraft. Secondly, battery life still limits most electric vehicles to flight times measured in minutes. For personal vehicles this could be frustrating, but if you’re just hopping in a driverless air taxi for a five minute trip across town it’s unlikely to become apparent to you.
Operators of the service simply need to make sure they have a big enough fleet to ensure a charged vehicle is never too far away, or they’ll need a way to swap out batteries easily, such as the one suggested by the makers of the Volocopter electric helicopter.
Finally, there has already been significant progress in developing technology and regulations needed to integrate autonomous drones into our airspace that future driverless flying cars can most likely piggyback off of.
Safety requirements will inevitably be more stringent, but adding more predictable and controllable autonomous drones to the skies is likely to be more attractive to regulators than trying to license and police thousands of new amateur pilots.
Image Credit: Lilium Continue reading →

Posted in Human Robots

#428367 Fusion for Energy signs multi-million ...

Posted on November 5, 2016 by Android

Fusion for Energy signs multi-million deal with Airbus Safran Launchers, Nuvia Limited and Cegelec CEM to develop robotics equipment for ITER
The contract for a value of nearly 100 million EUR is considered to be the single biggest robotics deal to date in the field of fusion energy. The state of the art equipment will form part of ITER, the world’s largest experimental fusion facility and the first in history to produce 500 MW. The prestigious project brings together seven parties (China, Europe, Japan, India, the Republic of Korea, the Russian Federation and the USA) which represent 50% of the world’s population and 80% of the global GDP.
The collaboration between Fusion for Energy (F4E), the EU organisation managing Europe’s contribution to ITER, with a consortium of companies consisting of Airbus Safran Launchers (France-Germany), Nuvia Limited (UK) and Cegelec CEM (France), companies of the VINCI Group, will run for a period of seven years. The UK Atomic Energy Authority (UK), Instituto Superior Tecnico (Portugal), AVT Europe NV (Belgium) and Millennium (France) will also be part of this deal which will deliver remotely operated systems for the transportation and confinement of components located in the ITER vacuum vessel.
The contract carries also a symbolic importance marking the signature all procurement packages managed by Europe in the field of remote handling. Carlo Damiani, F4E’s Project Manager for ITER Remote Handling Systems, explained that “F4E’s stake in ITER offers an unparalleled opportunity to companies and laboratories to develop expertise and an industrial culture in fusion reactors’ maintenance.”
Cut-away image of the ITER machine showing the casks at the three levels of the ITER machine. ITER IO © (Remote1 web). Photo Credit: f4e.europa.euIllustration of lorry next to an ITER cask. F4E © (Remote 2 web). Photo Credit: f4e.europa.euAerial view of the ITER construction site, October 2016. F4E © (ITER site aerial Oct). Photo Credit: f4e.europa.eu

Why ITER requires Remote Handling?
Remote handling refers to the high-tech systems that will help us maintain and repair the ITER machine. The space where the bulky equipment will operate is limited and the exposure of some of the components to radioactivity, prohibit any manual intervention inside the vacuum vessel.

What will be delivered through this contract?
The transfer of components from the ITER vacuum vessel to the Hot Cell building, where they will be deposited for maintenance, will need to be carried out with the help of massive double-door containers known as casks. According to current estimates, 15 of these casks will need to be manufactured and in their largest configuration they will measure 8.5 m x 3.7 m x 2.6 m approaching 100 tonnes when transporting the heaviest components. These enormous “boxes”, resembling to a conventional lorry container, will be remotely operated as they move between the different levels and buildings of the machine. Apart from the transportation and confinement of components, the ITER Cask and Plug Remote Handling System will also ensure the installation of the remote handling equipment entering into the vacuum vessel to pick up the components to be removed. The technologies underpinning this system will encompass a variety of high-tech skills and comply with nuclear safety requirements. A proven manufacturing experience in similar fields and the development of bespoke systems to perform mechanical transfers will be essential.

Background information
MEMO: Fusion for Energy signs multi-million deal with Airbus Safran Launchers, Nuvia Limited and Cegelec CEM to develop robotics equipment for ITER
Multimedia
To see how the ITER Remote Handling System will operate click on clip 1 and clip 2
To see the progress of the ITER construction site click here
To take a virtual tour on the ITER construction site click here

Image captions
Cut-away image of the ITER machine showing the casks at the three levels of the ITER machine. ITER IO © (Remote1 web)

Illustration of lorry next to an ITER cask. F4E © (Remote 2 web)

Aerial view of the ITER construction site, October 2016. F4E © (ITER site aerial Oct)

The consortium of companies
The consortium combines the space expertise of Airbus Safran Launchers, adapted to this extreme environment to ensure safe conditions for the ITER teams; with Nuvia comes a wealth of nuclear experience dating back to the beginnings of the UK Nuclear industry. Nuvia has delivered solutions to some of the world’s most complex nuclear challenges; and with Cegelec CEM as a specialist in mechanical projects for French nuclear sector, which contributes over 30 years in the nuclear arena, including turnkey projects for large scientific installations, as well as the realisation of complex mechanical systems.

Fusion for Energy
Fusion for Energy (F4E) is the European Union’s organisation for Europe’s contribution to ITER.
One of the main tasks of F4E is to work together with European industry, SMEs and research organisations to develop and provide a wide range of high technology components together with engineering, maintenance and support services for the ITER project.
F4E supports fusion R&D initiatives through the Broader Approach Agreement signed with Japan and prepares for the construction of demonstration fusion reactors (DEMO).
F4E was created by a decision of the Council of the European Union as an independent legal entity and was established in April 2007 for a period of 35 years.
Its offices are in Barcelona, Spain.
http://www.fusionforenergy.europa.eu
http://www.youtube.com/user/fusionforenergy
http://twitter.com/fusionforenergy
http://www.flickr.com/photos/fusionforenergy

ITER
ITER is a first-of-a-kind global collaboration. It will be the world’s largest experimental fusion facility and is designed to demonstrate the scientific and technological feasibility of fusion power. It is expected to produce a significant amount of fusion power (500 MW) for about seven minutes. Fusion is the process which powers the sun and the stars. When light atomic nuclei fuse together form heavier ones, a large amount of energy is released. Fusion research is aimed at developing a safe, limitless and environmentally responsible energy source.
Europe will contribute almost half of the costs of its construction, while the other six parties to this joint international venture (China, Japan, India, the Republic of Korea, the Russian Federation and the USA), will contribute equally to the rest.
The site of the ITER project is in Cadarache, in the South of France.
http://www.iter.org

For Fusion for Energy media enquiries contact:
Aris Apollonatos
E-mail: aris.apollonatos@f4e.europa.eu
Tel: + 34 93 3201833 + 34 649 179 42
The post Fusion for Energy signs multi-million deal to develop robotics equipment for ITER appeared first on Roboticmagazine. Continue reading →

Posted in Human Robots

#428357 UV Disinfection robot

Posted on November 4, 2016 by Android

Tech-Link Healthcare Systems partners with Blue Ocean Robotics Introducing UV-Disinfection Robot
Singapore, 1 November 2016 – The rise of robots have steered Tech-Link Healthcare Systems, a design and integrator of healthcare automation systems to offer solutions beyond automated storage and material handling systems. With a vision of providing holistic solutions for healthcare organisations, Tech-Link extends its capabilities by offering UV disinfection robot solutions via a strategic partnership with Danish robotics company, Blue Ocean Robotics to battle against Hospital Acquired Infections (HAIs).Singapore’s labour intensive healthcare environment and the unknown impact of HAIs in the developed city-state had beckoned Tech-Link Healthcare Systems to offer solutions in the area of disinfection. We recognised the rise in demand for robots to collaborate with humans and have identified this need for customers. Introducing robotic technologies as part of our suite of solutions is the company’s mission to innovate the way healthcare organisations work and enhance their customers’ experience.Tech-Link’s partnership with Blue Ocean Robotics affirms both companies’ efforts in reaching out to new markets with technology and solutions to ease manpower crunch, deliver greater value and improve the quality of healthcare services. As an official sales partner, we bring together Blue Ocean Robotics’ expertise in automating disinfection procedures to promote safer, efficient and more productive work environment.
“Tech-Link looks forward to developing reliable healthcare solutions with hardware and latest technologies from Blue Ocean Robotics for our customers in Singapore and abroad.” said Director of Tech-Link Healthcare Systems, Tan Hock Seng. “Our similar beliefs in the Blue Ocean strategy synergise the collaboration to improve the quality of healthcare services through robotics.” he added.“We are very excited about our new sales partner Tech-Link Healthcare Systems, since it is of great importance for Blue Ocean Robotics to expand our sales of new technologies beyond Denmark’s borders. Blue Ocean Robotics focuses on creating new markets for robots. This includes both the development of new technologies and the creation of new markets for revolutionary robot solutions. We welcome Tech-Link Healthcare Systems with open arms and look forward to a fruitful collaboration in the years ahead.” said Claus Risager, Rune K. Larsen & John Erland Østergaard, Partners and Co-CEOs, Blue Ocean Robotics.
UV-Disinfection RobotThe UV-Disinfection Robot – also called UV-DR – is an autonomous disinfection robot for hospitals, production lines and pharmaceutical companies. The robot is used primarily in, but not limited to the cleaning cycle with the aim of reducing spread of HAIs, infectious diseases, viruses, bacteria and other types or harmful organic materials.UV-DR is a mobile robot that can drive autonomously while emitting concentrated UV-C light onto pre-defined infectious hotspots in patient rooms and other hospital environments, thus disinfecting and killing bacteria and virus on all exposed surfaces. An exposure time of ten minutes is estimated to kill up to 99% of bacteria such as Clostridium Difficile.

About Tech-Link Healthcare Systems Pte LtdTech-Link Healthcare Systems is a subsidiary of Tech-Link Storage Engineering established in Singapore since 2015. The company designs and provides innovative solutions for the healthcare sector, focusing on advanced and emerging solutions to support healthcare organisations in optimising available resources and services. Tech-Link Healthcare Systems design and implement automated material handling systems to enhance secured material transport and logistics storage management in hospitals and other healthcare facilities. As a complete solution provider, the company also provides consultancy in systems design to streamline and automate processes as well as integrated video solutions within healthcare facilities.About Tech-Link Storage Engineering Pte LtdTech-Link Storage Engineering is a group of companies established in Singapore with more than 25 years of principal activities in procurement, manufacturing and marketing of storage, distribution and materials handling products and systems. From its domain expertise in storage and racking systems, Tech-Link is also involved in R&D, system design, supply and implementation of logistics supply chain automation systems. The business expanded its global capabilities in the area of planning and consultancy to provide solutions for Built-to-Suit industrial developments and Healthcare logistics systems.
Tech-Link is an ISO 9001:2008 and OHSAS 18001:2007 certified company for Quality Management System and Occupational, Health and Safety System.Visit www.techlinkstorageengineering.comAbout Blue Ocean RoboticsBlue Ocean Robotics is an international company group with presence across the globe including America, Europe, Asia and Australia. The robotics company has its headquarter in the city of Odense (www.odenserobotics.dk) in Denmark. Blue Ocean Robotics applies robot technology to create solutions and innovation for end-users and new businesses in partnerships.Visit www.blue-ocean-robotics.com
Here is a video showing the robot in action:

The post UV Disinfection robot appeared first on Roboticmagazine. Continue reading →

Posted in Human Robots

#428039 Naturipe Berry Growers Invests in ...

Posted on October 6, 2016 by Android

FOR IMMEDIATE RELEASE CONTACT: Gary Wishnatzki
O: (813)498-4278
C: (813)335-3959
gw@harvestcroo.com

NATURIPE BERRY GROWERS INVESTS IN HARVEST CROO ROBOTICS
Adds to the growing list of strawberry industry investors

Tampa, FL (September 20, 2016) – Naturipe Berry Growers has joined the growing list of strawberry industry investors supporting Harvest CROO Robotics’ mission to answer the need for agricultural labor with technology. Naturipe is one of the largest strawberry growers in North America. With the support of Naturipe, now more than 20% of the U.S. strawberry industry has invested in Harvest CROO Robotics.

“The lack of availability of labor to harvest strawberries is one of the great challenges facing our industry,” said Rich Amirsehhi, President and CEO of Naturipe Berry Growers. “Harvest CROO Robotics’ technology to harvest berries has tremendous promise to solve this critical problem.”

Harvest CROO Robotics continues to develop and test the latest technology for agricultural robotics. The company will test their latest prototype during the Florida strawberry season, which begins in November. Improvements include harvest speed and the development of an autonomous mobile platform that will carry the robotic pickers through the field. After berries are picked, they will be transferred overhead to the platform level, where they will be inspected and packed into consumer units by delta robots. The development of the packing robots, next year, will mark another key milestone in Harvest CROO Robotics’ technological advances.

“The technology is prepared to make a major leap this coming season,” said Bob Pitzer, Co-founder and Chief Technology Officer of Harvest CROO. “We were at commercial speed, last March, at a rate of 8 seconds to pick a plant. Now by using embedded processors and a streamlined picking head design, we expect to easily cut that time in half.”

“Naturipe Berry Growers sees joining this collaborative effort as an important step in ensuring the sustainability of the U.S. strawberry industry and putting our growers in a position to be early adopters of the technology,” said Amirsehhi.

Harvest CROO is currently fundraising in preparation for the next round of prototypes. To learn more about Harvest CROO, including investment opportunities, contact info@harvestcroo.com.
###

About Harvest CROO:

Harvest CROO (Computerized Robotic Optimized Obtainer) began in 2012 on Gary Wishnatzki’s vision of creating a solution to the dwindling labor force in agriculture. With the expertise of Co-founder and Chief Technical Officer, Bob Pitzer, they began developing the first Harvest CROO machines. In Previous rounds, $1.8 million was raised through qualified investors. Many of these investors are members of the strawberry industry, including Sweet Life Farms, Sam Astin III, California Giant, Inc., Main Street Produce, Inc., Sweet Darling Sales, Inc. Innovative Produce Inc., DG Berry, Inc., Central West, and Naturipe Berry Growers. In Round C, Harvest CROO is seeking to raise $3 million to build the next version, the Alpha unit, which will be the predecessor to a production model. To learn more about Harvest CROO, including current career opportunities for experienced engineers, contact info@harvestcroo.com.

About Naturipe Berry Growers:

Naturipe Berry Growers (NBG) is a co-op of growers that was founded in 1917 as the Central California Berry Growers Association. NBG markets their fruit through Naturipe Farms LLC, which is a grower-owned producer and international marketer of healthy, best tasting, premium berries. With production primarily from multi generation family farms, located in prime berry growing regions throughout North and South America. The diverse grower base ensures year-round availability of “locally grown” and “in-season global” conventional and organic berries. Naturipe Farms, formed in 2000, is a partnership between MBG Marketing, Hortifrut SA, Naturipe Berry Growers and Munger Farms. With sales and customer service offices located strategically throughout the USA – (HQ) Salinas CA., Grand Junction MI., Estero FL., Boston MA., Wenatchee WA., Atlanta GA.
For more information visit: www.naturipefarms.com or https://www.facebook.com/Naturipe
The post Naturipe Berry Growers Invests in Harvest CROO Robotics appeared first on Roboticmagazine. Continue reading →

Posted in Human Robots