Tag Archives: astronauts
#435662 Video Friday: This 3D-Printed ...
Video Friday is your weekly selection of awesome robotics videos, collected by your Automaton bloggers. We’ll also be posting a weekly calendar of upcoming robotics events for the next few months; here’s what we have so far (send us your events!):
ICRES 2019 – July 29-30, 2019 – London, U.K.
DARPA SubT Tunnel Circuit – August 15-22, 2019 – Pittsburgh, Pa., USA
IEEE Africon 2019 – September 25-27, 2019 – Accra, Ghana
ISRR 2019 – October 6-10, 2019 – Hanoi, Vietnam
Ro-Man 2019 – October 14-18, 2019 – New Delhi, India
Humanoids 2019 – October 15-17, 2019 – Toronto, Canada
Let us know if you have suggestions for next week, and enjoy today’s videos.
We’re used to seeing bristle bots about the size of a toothbrush head (which is not a coincidence), but Georgia Tech has downsized them, with some interesting benefits.
Researchers have created a new type of tiny 3D-printed robot that moves by harnessing vibration from piezoelectric actuators, ultrasound sources or even tiny speakers. Swarms of these “micro-bristle-bots” might work together to sense environmental changes, move materials – or perhaps one day repair injuries inside the human body.
The prototype robots respond to different vibration frequencies depending on their configurations, allowing researchers to control individual bots by adjusting the vibration. Approximately two millimeters long – about the size of the world’s smallest ant – the bots can cover four times their own length in a second despite the physical limitations of their small size.
“We are working to make the technology robust, and we have a lot of potential applications in mind,” said Azadeh Ansari, an assistant professor in the School of Electrical and Computer Engineering at the Georgia Institute of Technology. “We are working at the intersection of mechanics, electronics, biology and physics. It’s a very rich area and there’s a lot of room for multidisciplinary concepts.”
[ Georgia Tech ]
Most consumer drones are “multi-copters,” meaning that they have a series of rotors or propellers that allow them to hover like helicopters. But having rotors severely limits their energy efficiency, which means that they can’t easily carry heavy payloads or fly for long periods of time. To get the best of both worlds, drone designers have tried to develop “hybrid” fixed-wing drones that can fly as efficiently as airplanes, while still taking off and landing vertically like multi-copters.
These drones are extremely hard to control because of the complexity of dealing with their flight dynamics, but a team from MIT CSAIL aims to make the customization process easier, with a new system that allows users to design drones of different sizes and shapes that can nimbly switch between hovering and gliding – all by using a single controller.
In future work, the team plans to try to further increase the drone’s maneuverability by improving its design. The model doesn’t yet fully take into account complex aerodynamic effects between the propeller’s airflow and the wings. And lastly, their method trained the copter with “yaw velocity” set at zero, which means that it cannot currently perform sharp turns.
[ Paper ] via [ MIT ]
We’re not quite at the point where we can 3D print entire robots, but UCSD is getting us closer.
The UC San Diego researchers’ insight was twofold. They turned to a commercially available printer for the job, (the Stratasys Objet350 Connex3—a workhorse in many robotics labs). In addition, they realized one of the materials used by the 3D printer is made of carbon particles that can conduct power to sensors when connected to a power source. So roboticists used the black resin to manufacture complex sensors embedded within robotic parts made of clear polymer. They designed and manufactured several prototypes, including a gripper.
When stretched, the sensors failed at approximately the same strain as human skin. But the polymers the 3D printer uses are not designed to conduct electricity, so their performance is not optimal. The 3D printed robots also require a lot of post-processing before they can be functional, including careful washing to clean up impurities and drying.
However, researchers remain optimistic that in the future, materials will improve and make 3D printed robots equipped with embedded sensors much easier to manufacture.
[ UCSD ]
Congrats to Team Homer from the University of Koblenz-Landau, who won the RoboCup@Home world championship in Sydney!
[ Team Homer ]
When you’ve got a robot with both wheels and legs, motion planning is complicated. IIT has developed a new planner for CENTAURO that takes advantage of the different ways that the robot is able to get past obstacles.
[ Centauro ]
Thanks Dimitrios!
If you constrain a problem tightly enough, you can solve it even with a relatively simple robot. Here’s an example of an experimental breakfast robot named “Loraine” that can cook eggs, bacon, and potatoes using what looks to be zero sensing at all, just moving to different positions and actuating its gripper.
There’s likely to be enough human work required in the prep here to make the value that the robot adds questionable at best, but it’s a good example of how you can make a relatively complex task robot-compatible as long as you set it up in just the right way.
[ Connected Robotics ] via [ RobotStart ]
It’s been a while since we’ve seen a ball bot, and I’m not sure that I’ve ever seen one with a manipulator on it.
[ ETH Zurich RSL ]
Soft Robotics’ new mini fingers are able to pick up taco shells without shattering them, which as far as I can tell is 100 percent impossible for humans to do.
[ Soft Robotics ]
Yes, Starship’s wheeled robots can climb curbs, and indeed they have a pretty neat way of doing it.
[ Starship ]
Last year we posted a long interview with Christoph Bartneck about his research into robots and racism, and here’s a nice video summary of the work.
[ Christoph Bartneck ]
Canada’s contribution to the Lunar Gateway will be a smart robotic system which includes a next-generation robotic arm known as Canadarm3, as well as equipment, and specialized tools. Using cutting-edge software and advances in artificial intelligence, this highly-autonomous system will be able to maintain, repair and inspect the Gateway, capture visiting vehicles, relocate Gateway modules, help astronauts during spacewalks, and enable science both in lunar orbit and on the surface of the Moon.
[ CSA ]
An interesting demo of how Misty can integrate sound localization with other services.
[ Misty Robotics ]
The third and last period of H2020 AEROARMS project has brought the final developments in industrial inspection and maintenance tasks, such as the crawler retrieval and deployment (DLR) or the industrial validation in stages like a refinery or a cement factory.
[ Aeroarms ]
The Guardian S remote visual inspection and surveillance robot navigates a disaster training site to demonstrate its advanced maneuverability, long-range wireless communications and extended run times.
[ Sarcos ]
This appears to be a cake frosting robot and I wish I had like 3 more hours of this to share:
Also here is a robot that picks fried chicken using a curiously successful technique:
[ Kazumichi Moriyama ]
This isn’t strictly robots, but professor Hiroshi Ishii, associate director of the MIT Media Lab, gave a fascinating SIGCHI Lifetime Achievement Talk that’s absolutely worth your time.
[ Tangible Media Group ] Continue reading →
Posted in Human Robots
#435512 Russian Humanoid Robot to Pilot Soyuz ...
Skybot F-850 will spend a week on the ISS charming astronauts with its sense of humor Continue reading →
Posted in Human Robots
#435167 A Closer Look at the Robots Helping Us ...
Buck Rogers had Twiki. Luke Skywalker palled around with C-3PO and R2-D2. And astronauts aboard the International Space Station (ISS) now have their own robotic companions in space—Astrobee.
A pair of the cube-shaped robots were launched to the ISS during an April re-supply mission and are currently being commissioned for use on the space station. The free-flying space robots, dubbed Bumble and Honey, are the latest generation of robotic machines to join the human crew on the ISS.
Exploration of the solar system and beyond will require autonomous machines that can assist humans with numerous tasks—or go where we cannot. NASA has said repeatedly that robots will be instrumental in future space missions to the moon, Mars, and even to the icy moon Europa.
The Astrobee robots will specifically test robotic capabilities in zero gravity, replacing the SPHERES (Synchronized Position Hold, Engage, Reorient, Experimental Satellite) robots that have been on the ISS for more than a decade to test various technologies ranging from communications to navigation.
The 18-sided robots, each about the size of a volleyball or an oversized Dungeons and Dragons die, use CO2-based cold-gas thrusters for movement and a series of ultrasonic beacons for orientation. The Astrobee robots, on the other hand, can propel themselves autonomously around the interior of the ISS using electric fans and six cameras.
The modular design of the Astrobee robots means they are highly plug-and-play, capable of being reconfigured with different hardware modules. The robots’ software is also open-source, encouraging scientists and programmers to develop and test new algorithms and features.
And, yes, the Astrobee robots will be busy as bees once they are fully commissioned this fall, with experiments planned to begin next year. Scientists hope to learn more about how robots can assist space crews and perform caretaking duties on spacecraft.
Robots Working Together
The Astrobee robots are expected to be joined by a familiar “face” on the ISS later this year—the humanoid robot Robonaut.
Robonaut, also known as R2, was the first US-built robot on the ISS. It joined the crew back in 2011 without legs, which were added in 2014. However, the installation never entirely worked, as R2 experienced power failures that eventually led to its return to Earth last year to fix the problem. If all goes as planned, the space station’s first humanoid robot will return to the ISS to lend a hand to the astronauts and the new robotic arrivals.
In particular, NASA is interested in how the two different robotic platforms can complement each other, with an eye toward outfitting the agency’s proposed lunar orbital space station with various robots that can supplement a human crew.
“We don’t have definite plans for what would happen on the Gateway yet, but there’s a general recognition that intra-vehicular robots are important for space stations,” Astrobee technical lead Trey Smith in the NASA Intelligent Robotics Group told IEEE Spectrum. “And so, it would not be surprising to see a mobile manipulator like Robonaut, and a free flyer like Astrobee, on the Gateway.”
While the focus on R2 has been to test its capabilities in zero gravity and to use it for mundane or dangerous tasks in space, the technology enabling the humanoid robot has proven to be equally useful on Earth.
For example, R2 has amazing dexterity for a robot, with sensors, actuators, and tendons comparable to the nerves, muscles, and tendons in a human hand. Based on that design, engineers are working on a robotic glove that can help factory workers, for instance, do their jobs better while reducing the risk of repetitive injuries. R2 has also inspired development of a robotic exoskeleton for both astronauts in space and paraplegics on Earth.
Working Hard on Soft Robotics
While innovative and technologically sophisticated, Astrobee and Robonaut are typical robots in that neither one would do well in a limbo contest. In other words, most robots are limited in their flexibility and agility based on current hardware and materials.
A subfield of robotics known as soft robotics involves developing robots with highly pliant materials that mimic biological organisms in how they move. Scientists at NASA’s Langley Research Center are investigating how soft robots could help with future space exploration.
Specifically, the researchers are looking at a series of properties to understand how actuators—components responsible for moving a robotic part, such as Robonaut’s hand—can be built and used in space.
The team first 3D prints a mold and then pours a flexible material like silicone into the mold. Air bladders or chambers in the actuator expand and compress using just air.
Some of the first applications of soft robotics sound more tool-like than R2-D2-like. For example, two soft robots could connect to produce a temporary shelter for astronauts on the moon or serve as an impromptu wind shield during one of Mars’ infamous dust storms.
The idea is to use soft robots in situations that are “dangerous, dirty, or dull,” according to Jack Fitzpatrick, a NASA intern working on the soft robotics project at Langley.
Working on Mars
Of course, space robots aren’t only designed to assist humans. In many instances, they are the only option to explore even relatively close celestial bodies like Mars. Four American-made robotic rovers have been used to investigate the fourth planet from the sun since 1997.
Opportunity is perhaps the most famous, covering about 25 miles of terrain across Mars over 15 years. A dust storm knocked it out of commission last year, with NASA officially ending the mission in February.
However, the biggest and baddest of the Mars rovers, Curiosity, is still crawling across the Martian surface, sending back valuable data since 2012. The car-size robot carries 17 cameras, a laser to vaporize rocks for study, and a drill to collect samples. It is on the hunt for signs of biological life.
The next year or two could see a virtual traffic jam of robots to Mars. NASA’s Mars 2020 Rover is next in line to visit the Red Planet, sporting scientific gadgets like an X-ray fluorescence spectrometer for chemical analyses and ground-penetrating radar to see below the Martian surface.
This diagram shows the instrument payload for the Mars 2020 mission. Image Credit: NASA.
Meanwhile, the Europeans have teamed with the Russians on a rover called Rosalind Franklin, named after a famed British chemist, that will drill down into the Martian ground for evidence of past or present life as soon as 2021.
The Chinese are also preparing to begin searching for life on Mars using robots as soon as next year, as part of the country’s Mars Global Remote Sensing Orbiter and Small Rover program. The mission is scheduled to be the first in a series of launches that would culminate with bringing samples back from Mars to Earth.
Perhaps there is no more famous utterance in the universe of science fiction as “to boldly go where no one has gone before.” However, the fact is that human exploration of the solar system and beyond will only be possible with robots of different sizes, shapes, and sophistication.
Image Credit: NASA. Continue reading →
Posted in Human Robots
#435023 Inflatable Robot Astronauts and How to ...
The typical cultural image of a robot—as a steel, chrome, humanoid bucket of bolts—is often far from the reality of cutting-edge robotics research. There are difficulties, both social and technological, in realizing the image of a robot from science fiction—let alone one that can actually help around the house. Often, it’s simply the case that great expense in producing a humanoid robot that can perform dozens of tasks quite badly is less appropriate than producing some other design that’s optimized to a specific situation.
A team of scientists from Brigham Young University has received funding from NASA to investigate an inflatable robot called, improbably, King Louie. The robot was developed by Pneubotics, who have a long track record in the world of soft robotics.
In space, weight is at a premium. The world watched in awe and amusement when Commander Chris Hadfield sang “Space Oddity” from the International Space Station—but launching that guitar into space likely cost around $100,000. A good price for launching payload into outer space is on the order of $10,000 per pound ($22,000/kg).
For that price, it would cost a cool $1.7 million to launch Boston Dynamics’ famous ATLAS robot to the International Space Station, and its bulk would be inconvenient in the cramped living quarters available. By contrast, an inflatable robot like King Louie is substantially lighter and can simply be deflated and folded away when not in use. The robot can be manufactured from cheap, lightweight, and flexible materials, and minor damage is easy to repair.
Inflatable Robots Under Pressure
The concept of inflatable robots is not new: indeed, earlier prototypes of King Louie were exhibited back in 2013 at Google I/O’s After Hours, flailing away at each other in a boxing ring. Sparks might fly in fights between traditional robots, but the aim here was to demonstrate that the robots are passively safe: the soft, inflatable figures won’t accidentally smash delicate items when moving around.
Health and safety regulations form part of the reason why robots don’t work alongside humans more often, but soft robots would be far safer to use in healthcare or around children (whose first instinct, according to BYU’s promotional video, is either to hug or punch King Louie.) It’s also much harder to have nightmarish fantasies about robotic domination with these friendlier softbots: Terminator would’ve been a much shorter franchise if Skynet’s droids were inflatable.
Robotic exoskeletons are increasingly used for physical rehabilitation therapies, as well as for industrial purposes. As countries like Japan seek to care for their aging populations with robots and alleviate the burden on nurses, who suffer from some of the highest rates of back injuries of any profession, soft robots will become increasingly attractive for use in healthcare.
Precision and Proprioception
The main issue is one of control. Rigid, metallic robots may be more expensive and more dangerous, but the simple fact of their rigidity makes it easier to map out and control the precise motions of each of the robot’s limbs, digits, and actuators. Individual motors attached to these rigid robots can allow for a great many degrees of freedom—individual directions in which parts of the robot can move—and precision control.
For example, ATLAS has 28 degrees of freedom, while Shadow’s dexterous robot hand alone has 20. This is much harder to do with an inflatable robot, for precisely the same reasons that make it safer. Without hard and rigid bones, other methods of control must be used.
In the case of King Louie, the robot is made up of many expandable air chambers. An air-compressor changes the pressure levels in these air chambers, allowing them to expand and contract. This harks back to some of the earliest pneumatic automata. Pairs of chambers act antagonistically, like muscles, such that when one chamber “tenses,” another relaxes—allowing King Louie to have, for example, four degrees of freedom in each of its arms.
The robot is also surprisingly strong. Professor Killpack, who works at BYU on the project, estimates that its payload is comparable to other humanoid robots on the market, like Rethink Robotics’ Baxter (RIP).
Proprioception, that sixth sense that allows us to map out and control our own bodies and muscles in fine detail, is being enhanced for a wider range of soft, flexible robots with the use of machine learning algorithms connected to input from a whole host of sensors on the robot’s body.
Part of the reason this is so complicated with soft, flexible robots is that the shape and “map” of the robot’s body can change; that’s the whole point. But this means that every time King Louie is inflated, its body is a slightly different shape; when it becomes deformed, for example due to picking up objects, the shape changes again, and the complex ways in which the fabric can twist and bend are far more difficult to model and sense than the behavior of the rigid metal of King Louie’s hard counterparts. When you’re looking for precision, seemingly-small changes can be the difference between successfully holding an object or dropping it.
Learning to Move
Researchers at BYU are therefore spending a great deal of time on how to control the soft-bot enough to make it comparably useful. One method involves the commercial tracking technology used in the Vive VR system: by moving the game controller, which provides a constant feedback to the robot’s arm, you can control its position. Since the tracking software provides an estimate of the robot’s joint angles and continues to provide feedback until the arm is correctly aligned, this type of feedback method is likely to work regardless of small changes to the robot’s shape.
The other technologies the researchers are looking into for their softbot include arrays of flexible, tactile sensors to place on the softbot’s skin, and minimizing the complex cross-talk between these arrays to get coherent information about the robot’s environment. As with some of the new proprioception research, the project is looking into neural networks as a means of modeling the complicated dynamics—the motion and response to forces—of the softbot. This method relies on large amounts of observational data, mapping how the robot is inflated and how it moves, rather than explicitly understanding and solving the equations that govern its motion—which hopefully means the methods can work even as the robot changes.
There’s still a long way to go before soft and inflatable robots can be controlled sufficiently well to perform all the tasks they might be used for. Ultimately, no one robotic design is likely to be perfect for any situation.
Nevertheless, research like this gives us hope that one day, inflatable robots could be useful tools, or even companions, at which point the advertising slogans write themselves: Don’t let them down, and they won’t let you down!
Image Credit: Brigham Young University. Continue reading →
Posted in Human Robots
#433655 First-Ever Grad Program in Space Mining ...
Maybe they could call it the School of Space Rock: A new program being offered at the Colorado School of Mines (CSM) will educate post-graduate students on the nuts and bolts of extracting and using valuable materials such as rare metals and frozen water from space rocks like asteroids or the moon.
Officially called Space Resources, the graduate-level program is reputedly the first of its kind in the world to offer a course in the emerging field of space mining. Heading the program is Angel Abbud-Madrid, director of the Center for Space Resources at Mines, a well-known engineering school located in Golden, Colorado, where Molson Coors taps Rocky Mountain spring water for its earthly brews.
The first semester for the new discipline began last month. While Abbud-Madrid didn’t immediately respond to an interview request, Singularity Hub did talk to Chris Lewicki, president and CEO of Planetary Resources, a space mining company whose founders include Peter Diamandis, Singularity University co-founder.
A former NASA engineer who worked on multiple Mars missions, Lewicki says the Space Resources program at CSM, with its multidisciplinary focus on science, economics, and policy, will help students be light years ahead of their peers in the nascent field of space mining.
“I think it’s very significant that they’ve started this program,” he said. “Having students with that kind of background exposure just allows them to be productive on day one instead of having to kind of fill in a lot of things for them.”
Who would be attracted to apply for such a program? There are many professionals who could be served by a post-baccalaureate certificate, master’s degree, or even Ph.D. in Space Resources, according to Lewicki. Certainly aerospace engineers and planetary scientists would be among the faces in the classroom.
“I think it’s [also] people who have an interest in what I would call maybe space robotics,” he said. Lewicki is referring not only to the classic example of robotic arms like the Canadarm2, which lends a hand to astronauts aboard the International Space Station, but other types of autonomous platforms.
One example might be Planetary Resources’ own Arkyd-6, a small, autonomous satellite called a CubeSat launched earlier this year to test different technologies that might be used for deep-space exploration of resources. The proof-of-concept was as much a test for the technology—such as the first space-based use of a mid-wave infrared imager to detect water resources—as it was for being able to work in space on a shoestring budget.
“We really proved that doing one of these billion-dollar science missions to deep space can be done for a lot less if you have a very focused goal, and if you kind of cut a lot of corners and then put some commercial approaches into those things,” Lewicki said.
A Trillion-Dollar Industry
Why space mining? There are at least a trillion reasons.
Astrophysicist Neil deGrasse Tyson famously said that the first trillionaire will be the “person who exploits the natural resources on asteroids.” That’s because asteroids—rocky remnants from the formation of our solar system more than four billion years ago—harbor precious metals, ranging from platinum and gold to iron and nickel.
For instance, one future target of exploration by NASA—an asteroid dubbed 16 Psyche, orbiting the sun in the asteroid belt between Mars and Jupiter—is worth an estimated $10,000 quadrillion. It’s a number so mind-bogglingly big that it would crash the global economy, if someone ever figured out how to tow it back to Earth without literally crashing it into the planet.
Living Off the Land
Space mining isn’t just about getting rich. Many argue that humanity’s ability to extract resources in space, especially water that can be refined into rocket fuel, will be a key technology to extend our reach beyond near-Earth space.
The presence of frozen water around the frigid polar regions of the moon, for example, represents an invaluable source to power future deep-space missions. Splitting H20 into its component elements of hydrogen and oxygen would provide a nearly inexhaustible source of rocket fuel. Today, it costs $10,000 to put a pound of payload in Earth orbit, according to NASA.
Until more advanced rocket technology is developed, the moon looks to be the best bet for serving as the launching pad to Mars and beyond.
Moon Versus Asteroid
However, Lewicki notes that despite the moon’s proximity and our more intimate familiarity with its pockmarked surface, that doesn’t mean a lunar mission to extract resources is any easier than a multi-year journey to a fast-moving asteroid.
For one thing, fighting gravity to and from the moon is no easy feat, as the moon has a significantly stronger gravitational field than an asteroid. Another challenge is that the frozen water is located in permanently shadowed lunar craters, meaning space miners can’t rely on solar-powered equipment, but on some sort of external energy source.
And then there’s the fact that moon craters might just be the coldest places in the solar system. NASA’s Lunar Reconnaissance Orbiter found temperatures plummeted as low as 26 Kelvin, or more than minus 400 degrees Fahrenheit. In comparison, the coldest temperatures on Earth have been recorded near the South Pole in Antarctica—about minus 148 degrees F.
“We don’t operate machines in that kind of thermal environment,” Lewicki said of the extreme temperatures detected in the permanent dark regions of the moon. “Antarctica would be a balmy desert island compared to a lunar polar crater.”
Of course, no one knows quite what awaits us in the asteroid belt. Answers may soon be forthcoming. Last week, the Japan Aerospace Exploration Agency landed two small, hopping rovers on an asteroid called Ryugu. Meanwhile, NASA hopes to retrieve a sample from the near-Earth asteroid Bennu when its OSIRIS-REx mission makes contact at the end of this year.
No Bucks, No Buck Rogers
Visionaries like Elon Musk and Jeff Bezos talk about colonies on Mars, with millions of people living and working in space. The reality is that there’s probably a reason Buck Rogers was set in the 25th century: It’s going to take a lot of money and a lot of time to realize those sci-fi visions.
Or, as Lewicki put it: “No bucks, no Buck Rogers.”
The cost of operating in outer space can be prohibitive. Planetary Resources itself is grappling with raising additional funding, with reports this year about layoffs and even a possible auction of company assets.
Still, Lewicki is confident that despite economic and technical challenges, humanity will someday exceed even the boldest dreamers—skyscrapers on the moon, interplanetary trips to Mars—as judged against today’s engineering marvels.
“What we’re doing is going to be very hard, very painful, and almost certainly worth it,” he said. “Who would have thought that there would be a job for a space miner that you could go to school for, even just five or ten years ago. Things move quickly.”
Image Credit: M-SUR / Shutterstock.com Continue reading →
Posted in Human Robots