Tag Archives: robotic arm

#437903 An open-source and low-cost robotic arm ...

Posted on December 14, 2020 by Android

Researchers at Tecnologico de Monterrey in Mexico have recently created a low-cost robotic arm that could enhance online robotics education, allowing teachers to remotely demonstrate theoretical concepts explained during their lessons. This robotic arm, presented in a paper published in Hardware X, is fully open source and can be easily assembled by all teachers and educators worldwide. Continue reading →

Posted in Human Robots

#437896 Solar-based Electronic Skin Generates ...

Posted on December 13, 2020 by Android

Replicating the human sense of touch is complicated—electronic skins need to be flexible, stretchable, and sensitive to temperature, pressure and texture; they need to be able to read biological data and provide electronic readouts. Therefore, how to power electronic skin for continuous, real-time use is a big challenge.

To address this, researchers from Glasgow University have developed an energy-generating e-skin made out of miniaturized solar cells, without dedicated touch sensors. The solar cells not only generate their own power—and some surplus—but also provide tactile capabilities for touch and proximity sensing. An early-view paper of their findings was published in IEEE Transactions on Robotics.

When exposed to a light source, the solar cells on the s-skin generate energy. If a cell is shadowed by an approaching object, the intensity of the light, and therefore the energy generated, reduces, dropping to zero when the cell makes contact with the object, confirming touch. In proximity mode, the light intensity tells you how far the object is with respect to the cell. “In real time, you can then compare the light intensity…and after calibration find out the distances,” says Ravinder Dahiya of the Bendable Electronics and Sensing Technologies (BEST) Group, James Watt School of Engineering, University of Glasgow, where the study was carried out. The team used infra-red LEDs with the solar cells for proximity sensing for better results.

To demonstrate their concept, the researchers wrapped a generic 3D-printed robotic hand in their solar skin, which was then recorded interacting with its environment. The proof-of-concept tests showed an energy surplus of 383.3 mW from the palm of the robotic arm. “The eSkin could generate more than 100 W if present over the whole body area,” they reported in their paper.

“If you look at autonomous, battery-powered robots, putting an electronic skin [that] is consuming energy is a big problem because then it leads to reduced operational time,” says Dahiya. “On the other hand, if you have a skin which generates energy, then…it improves the operational time because you can continue to charge [during operation].” In essence, he says, they turned a challenge—how to power the large surface area of the skin—into an opportunity—by turning it into an energy-generating resource.

Dahiya envisages numerous applications for BEST’s innovative e-skin, given its material-integrated sensing capabilities, apart from the obvious use in robotics. For instance, in prosthetics: “[As] we are using [a] solar cell as a touch sensor itself…we are also [making it] less bulkier than other electronic skins.” This, he adds, will help create prosthetics that are of optimal weight and size, thus making it easier for prosthetics users. “If you look at electronic skin research, the the real action starts after it makes contact… Solar skin is a step ahead, because it will start to work when the object is approaching…[and] have more time to prepare for action.” This could effectively reduce the time lag that is often seen in brain–computer interfaces.

There are also possibilities in the automation sector, particularly in electrical and interactive vehicles. A car covered with solar e-skin, because of its proximity-sensing capabilities, would be able to “see” an approaching obstacle or a person. It isn’t “seeing” in the biological sense, Dahiya clarifies, but from the point of view of a machine. This can be integrated with other objects, not just cars, for a variety of uses. “Gestures can be recognized as well…[which] could be used for gesture-based control…in gaming or in other sectors.”

In the lab, tests were conducted with a single source of white light at 650 lux, but Dahiya feels there are interesting possibilities if they could work with multiple light sources that the e-skin could differentiate between. “We are exploring different AI techniques [for that],” he says, “processing the data in an innovative way [so] that we can identify the the directions of the light sources as well as the object.”

The BEST team’s achievement brings us closer to a flexible, self-powered, cost-effective electronic skin that can touch as well as “see.” At the moment, however, there are still some challenges. One of them is flexibility. In their prototype, they used commercial solar cells made of amorphous silicon, each 1cm x 1cm. “They are not flexible, but they are integrated on a flexible substrate,” Dahiya says. “We are currently exploring nanowire-based solar cells…[with which] we we hope to achieve good performance in terms of energy as well as sensing functionality.” Another shortcoming is what Dahiya calls “the integration challenge”—how to make the solar skin work with different materials. Continue reading →

Posted in Human Robots

#437884 Hyundai Buys Boston Dynamics for Nearly ...

Posted on December 11, 2020 by Android

This morning just after 3 a.m. ET, Boston Dynamics sent out a media release confirming that Hyundai Motor Group has acquired a controlling interest in the company that values Boston Dynamics at US $1.1 billion:

Under the agreement, Hyundai Motor Group will hold an approximately 80 percent stake in Boston Dynamics and SoftBank, through one of its affiliates, will retain an approximately 20 percent stake in Boston Dynamics after the closing of the transaction.

The release is very long, but does have some interesting bits—we’ll go through them, and talk about what this might mean for both Boston Dynamics and Hyundai.

We’ve asked Boston Dynamics for comment, but they’ve been unusually quiet for the last few days (I wonder why!). So at this point just keep in mind that the only things we know for sure are the ones in the release. If (when?) we hear anything from either Boston Dynamics or Hyundai, we’ll update this post.

The first thing to be clear on is that the acquisition is split between Hyundai Motor Group’s affiliates, including Hyundai Motor, Hyundai Mobis, and Hyundai Glovis. Hyundai Motor makes cars, Hyundai Mobis makes car parts and seems to be doing some autonomous stuff as well, and Hyundai Glovis does logistics. There are many other groups that share the Hyundai name, but they’re separate entities, at least on paper. For example, there’s a Hyundai Robotics, but that’s part of Hyundai Heavy Industries, a different company than Hyundai Motor Group. But for this article, when we say “Hyundai,” we’re talking about Hyundai Motor Group.

What’s in it for Hyundai?
Let’s get into the press release, which is filled with press release-y terms like “synergies” and “working together”—you can view the whole thing here—but still has some parts that convey useful info.

By establishing a leading presence in the field of robotics, the acquisition will mark another major step for Hyundai Motor Group toward its strategic transformation into a Smart Mobility Solution Provider. To propel this transformation, Hyundai Motor Group has invested substantially in development of future technologies, including in fields such as autonomous driving technology, connectivity, eco-friendly vehicles, smart factories, advanced materials, artificial intelligence (AI), and robots.

If Hyundai wants to be a “Smart Mobility Solution Provider” with a focus on vehicles, it really seems like there’s a whole bunch of other ways they could have spent most of a billion dollars that would get them there quicker. Will Boston Dynamics’ expertise help them develop autonomous driving technology? Sure, I guess, but why not just buy an autonomous car startup instead? Boston Dynamics is more about “robots,” which happens to be dead last on the list above.

There was some speculation a couple of weeks ago that Hyundai was going to try and leverage Boston Dynamics to make a real version of this hybrid wheeled/legged concept car, so if that’s what Hyundai means by “Smart Mobility Solution Provider,” then I suppose the Boston Dynamics acquisition makes more sense. Still, I think that’s unlikely, because it’s just a concept car, after all.

In addition to “smart mobility,” which seems like a longer-term goal for Hyundai, the company also mentions other, more immediate benefits from the acquisition:

Advanced robotics offer opportunities for rapid growth with the potential to positively impact society in multiple ways. Boston Dynamics is the established leader in developing agile, mobile robots that have been successfully integrated into various business operations. The deal is also expected to allow Hyundai Motor Group and Boston Dynamics to leverage each other’s respective strengths in manufacturing, logistics, construction and automation.

“Successfully integrated” might be a little optimistic here. They’re talking about Spot, of course, but I think the best you could say at this point is that Spot is in the middle of some promising pilot projects. Whether it’ll be successfully integrated in the sense that it’ll have long-term commercial usefulness and value remains to be seen. I’m optimistic about this as well, but Spot is definitely not there yet.

What does probably hold a lot of value for Hyundai is getting Spot, Pick, and perhaps even Handle into that “manufacturing, logistics, construction” stuff. This is the bread and butter for robots right now, and Boston Dynamics has plenty of valuable technology to offer in those spaces.

Photo: Bob O’Connor

Boston Dynamics is selling Spot for $74,500, shipping included.

Betting on Spot and Pick
With Boston Dynamics founder Marc Raibert’s transition to Chairman of the company, the CEO position is now occupied by Robert Playter, the long-time VP of engineering and more recently COO at Boston Dynamics. Here’s his statement from the release:

“Boston Dynamics’ commercial business has grown rapidly as we’ve brought to market the first robot that can automate repetitive and dangerous tasks in workplaces designed for human-level mobility. We and Hyundai share a view of the transformational power of mobility and look forward to working together to accelerate our plans to enable the world with cutting edge automation, and to continue to solve the world’s hardest robotics challenges for our customers.”

Whether Spot is in fact “the first robot that can automate repetitive and dangerous tasks in workplaces designed for human-level mobility” on the market is perhaps something that could be argued against, although I won’t. Whether or not it was the first robot that can do these kinds of things, it’s definitely not the only robot that do these kinds of things, and going forward, it’s going to be increasingly challenging for Spot to maintain its uniqueness.

For a long time, Boston Dynamics totally owned the quadruped space. Now, they’re one company among many—ANYbotics and Unitree are just two examples of other quadrupeds that are being successfully commercialized. Spot is certainly very capable and easy to use, and we shouldn’t underestimate the effort required to create a robot as complex as Spot that can be commercially used and supported. But it’s not clear how long they’ll maintain that advantage, with much more affordable platforms coming out of Asia, and other companies offering some unique new capabilities.

Photo: Boston Dynamics

Boston Dynamics’ Handle is an all-electric robot featuring a leg-wheel hybrid mobility system, a manipulator arm with a vacuum gripper, and a counterbalancing tail.

Boston Dynamics’ picking system, which stemmed from their 2019 acquisition of Kinema Systems, faces the same kinds of challenges—it’s very good, but it’s not totally unique.

Boston Dynamics produces highly capable mobile robots with advanced mobility, dexterity and intelligence, enabling automation in difficult, dangerous, or unstructured environments. The company launched sales of its first commercial robot, Spot in June of 2020 and has since sold hundreds of robots in a variety of industries, such as power utilities, construction, manufacturing, oil and gas, and mining. Boston Dynamics plans to expand the Spot product line early next year with an enterprise version of the robot with greater levels of autonomy and remote inspection capabilities, and the release of a robotic arm, which will be a breakthrough in mobile manipulation.

Boston Dynamics is also entering the logistics automation market with the industry leading Pick, a computer vision-based depalletizing solution, and will introduce a mobile robot for warehouses in 2021.

Huh. We’ll be trying to figure out what “greater levels of autonomy” means, as well as whether the “mobile robot for warehouses” is Handle, or something more like an autonomous mobile robot (AMR) platform. I’d honestly be surprised if Handle was ready for work outside of Boston Dynamics next year, and it’s hard to imagine how Boston Dynamics could leverage their expertise into the AMR space with something that wouldn’t just seem… Dull, compared to what they usually do. I hope to be surprised, though!

A new deep-pocketed benefactor

Hyundai Motor Group’s decision to acquire Boston Dynamics is based on its growth potential and wide range of capabilities.

“Wide range of capabilities” we get, but that other phrase, “growth potential,” has a heck of a lot wrapped up in it. At the moment, Boston Dynamics is nowhere near profitable, as far as we know. SoftBank acquired Boston Dynamics in 2017 for between one hundred and two hundred million, and over the last three years they’ve poured hundreds of millions more into Boston Dynamics.

Hyundai’s 80 percent stake just means that they’ll need to take over the majority of that support, and perhaps even increase it if Boston Dynamics’ growth is one of their primary goals. Hyundai can’t have a reasonable expectation that Boston Dynamics will be profitable any time soon; they’re selling Spots now, but it’s an open question whether Spot will manage to find a scalable niche in which it’ll be useful in the sort of volume that will make it a sustainable commercial success. And even if it does become a success, it seems unlikely that Spot by itself will make a significant dent in Boston Dynamics’ burn rate anytime soon. Boston Dynamics will have more products of course, but it’s going to take a while, and Hyundai will need to support them in the interim.

Depending on whether Hyundai views Boston Dynamics as a company that does research or a company that makes robots that are useful and profitable, it may be difficult for Boston Dynamics to justify the cost to develop the
next Atlas, when the
current one still seems so far from commercialization

It’s become clear that to sustain itself, Boston Dynamics needs a benefactor with very deep pockets and a long time horizon. Initially, Boston Dynamics’ business model (or whatever you want to call it) was to do bespoke projects for defense-ish folks like DARPA, but from what we understand Boston Dynamics stopped that sort of work after Google acquired them back in 2013. From one perspective, that government funding did exactly what it was supposed to do, which was to fund the development of legged robots through low TRLs (technology readiness levels) to the point where they could start to explore commercialization.

The question now, though, is whether Hyundai is willing to let Boston Dynamics undertake the kinds of low-TRL, high-risk projects that led from BigDog to LS3 to Spot, and from PETMAN to DRC Atlas to the current Atlas. So will Hyundai be cool about the whole thing and be the sort of benefactor that’s willing to give Boston Dynamics the resources that they need to keep doing what they’re doing, without having to answer too many awkward questions about things like practicality and profitability? Hyundai can certainly afford to do this, but so could SoftBank, and Google—the question is whether Hyundai will want to, over the length of time that’s required for the development of the kind of ultra-sophisticated robotics hardware that Boston Dynamics specializes in.

To put it another way: Depending whether Hyundai’s perspective on Boston Dynamics is as a company that does research or a company that makes robots that are useful and profitable, it may be difficult for Boston Dynamics to justify the cost to develop the next Atlas, when the current one still seems so far from commercialization.

Google, SoftBank, now Hyundai

Boston Dynamics possesses multiple key technologies for high-performance robots equipped with perception, navigation, and intelligence.

Hyundai Motor Group’s AI and Human Robot Interaction (HRI) expertise is highly synergistic with Boston Dynamics’s 3D vision, manipulation, and bipedal/quadruped expertise.

As it turns out, Hyundai Motors does have its own robotics lab, called Hyundai Motors Robotics Lab. Their website is not all that great, but here’s a video from last year:

I’m not entirely clear on what Hyundai means when they use the word “synergistic” when they talk about their robotics lab and Boston Dynamics, but it’s a little bit concerning. Usually, when a big company buys a little company that specializes in something that the big company is interested in, the idea is that the little company, to some extent, will be absorbed into the big company to give them some expertise in that area. Historically, however, Boston Dynamics has been highly resistant to this, maintaining its post-acquisition independence and appearing to be very reluctant to do anything besides what it wants to do, at whatever pace it wants to do it, and as by itself as possible.

From what we understand, Boston Dynamics didn’t integrate particularly well with Google’s robotics push in 2013, and we haven’t seen much evidence that SoftBank’s experience was much different. The most direct benefit to SoftBank (or at least the most visible one) was the addition of a fleet of Spot robots to the SoftBank Hawks baseball team cheerleading squad, along with a single (that we know about) choreographed gymnastics routine from an Atlas robot that was only shown on video.

And honestly, if you were a big manufacturing company with a bunch of money and you wanted to build up your own robotics program quickly, you’d probably have much better luck picking up some smaller robotics companies who were a bit less individualistic and would probably be more amenable to integration and would cost way less than a billion dollars-ish. And if integration is ultimately Hyundai’s goal, we’ll be very sad, because it’ll likely signal the end of Boston Dynamics doing the unfettered crazy stuff that we’ve grown to love.

Photo: Bob O’Connor

Possibly the most agile humanoid robot ever built, Atlas can run, climb, jump over obstacles, and even get up after a fall.

Boston Dynamics contemplates its future

The release ends by saying that the transaction is “subject to regulatory approvals and other customary closing conditions” and “is expected to close by June of 2021.” Again, you can read the whole thing here.

My initial reaction is that, despite the “synergies” described by Hyundai, it’s certainly not immediately obvious why the company wants to own 80 percent of Boston Dynamics. I’d also like a better understanding of how they arrived at the $1.1 billion valuation. I’m not saying this because I don’t believe in what Boston Dynamics is doing or in the inherent value of the company, because I absolutely do, albeit perhaps in a slightly less tangible sense. But when you start tossing around numbers like these, a big pile of expectations inevitably comes along with them. I hope that Boston Dynamics is unique enough that the kinds of rules that normally apply to robotics companies (or companies in general) can be set aside, at least somewhat, but I also worry that what made Boston Dynamics great was the explicit funding for the kinds of radical ideas that eventually resulted in robots like Atlas and Spot.

Can Hyundai continue giving Boston Dynamics the support and freedom that they need to keep doing the kinds of things that have made them legendary? I certainly hope so. Continue reading →

Posted in Human Robots

#437765 Video Friday: Massive Robot Joins ...

Posted on November 28, 2020 by Android

Video Friday is your weekly selection of awesome robotics videos, collected by your Automaton bloggers. We’ll also be posting a weekly calendar of upcoming robotics events for the next few months; here’s what we have so far (send us your events!):

AWS Cloud Robotics Summit – August 18-19, 2020 – [Online Conference]
CLAWAR 2020 – August 24-26, 2020 – [Virtual Conference]
ICUAS 2020 – September 1-4, 2020 – Athens, Greece
ICRES 2020 – September 28-29, 2020 – Taipei, Taiwan
IROS 2020 – October 25-29, 2020 – Las Vegas, Nevada
ICSR 2020 – November 14-16, 2020 – Golden, Colorado
Let us know if you have suggestions for next week, and enjoy today’s videos.

Here are some professional circus artists messing around with an industrial robot for fun, like you do.

The acrobats are part of Östgötateatern, a Swedish theatre group, and the chair bit got turned into its own act, called “The Last Fish.” But apparently the Swedish Work Environment Authority didn’t like that an industrial robot—a large ABB robotic arm—was being used in an artistic performance, arguing that the same safety measures that apply in a factory setting would apply on stage. In other words, the robot had to operate inside a protective cage and humans could not physically interact with it.

When told that their robot had to be removed, the acrobats went to court. And won! At least that’s what we understand from this Swedish press release. The court in Linköping, in southern Sweden, ruled that the safety measures taken by the theater had been sufficient. The group had worked with a local robotics firm, Dyno Robotics, to program the manipulator and learn how to interact with it as safely as possible. The robot—which the acrobats say is the eighth member of their troupe—will now be allowed to return.

[ Östgötateatern ]

Houston Mechathronics’ Aquanaut continues to be awesome, even in the middle of a pandemic. It’s taken the big step (big swim?) out of NASA’s swimming pool and into open water.

[ HMI ]

Researchers from Carnegie Mellon University and Facebook AI Research have created a navigation system for robots powered by common sense. The technique uses machine learning to teach robots how to recognize objects and understand where they’re likely to be found in house. The result allows the machines to search more strategically.

[ CMU ]

Cassie manages 2.1 m/s, which is uncomfortably fast in a couple of different ways.

Next, untethered. After that, running!

[ Michigan Robotics ]

Engineers at Caltech have designed a new data-driven method to control the movement of multiple robots through cluttered, unmapped spaces, so they do not run into one another.

Multi-robot motion coordination is a fundamental robotics problem with wide-ranging applications that range from urban search and rescue to the control of fleets of self-driving cars to formation-flying in cluttered environments. Two key challenges make multi-robot coordination difficult: first, robots moving in new environments must make split-second decisions about their trajectories despite having incomplete data about their future path; second, the presence of larger numbers of robots in an environment makes their interactions increasingly complex (and more prone to collisions).

To overcome these challenges, Soon-Jo Chung, Bren Professor of Aerospace, and Yisong Yue, professor of computing and mathematical sciences, along with Caltech graduate student Benjamin Rivière (MS ’18), postdoctoral scholar Wolfgang Hönig, and graduate student Guanya Shi, developed a multi-robot motion-planning algorithm called “Global-to-Local Safe Autonomy Synthesis,” or GLAS, which imitates a complete-information planner with only local information, and “Neural-Swarm,” a swarm-tracking controller augmented to learn complex aerodynamic interactions in close-proximity flight.

[ Caltech ]

Fetch Robotics’ Freight robot is now hauling around pulsed xenon UV lamps to autonomously disinfect spaces with UV-A, UV-B, and UV-C, all at the same time.

[ SmartGuard UV ]

When you’re a vertically symmetrical quadruped robot, there is no upside-down.

[ Ghost Robotics ]

In the virtual world, the objects you pick up do not exist: you can see that cup or pen, but it does not feel like you’re touching them. That presented a challenge to EPFL professor Herbert Shea. Drawing on his extensive experience with silicone-based muscles and motors, Shea wanted to find a way to make virtual objects feel real. “With my team, we’ve created very small, thin and fast actuators,” explains Shea. “They are millimeter-sized capsules that use electrostatic energy to inflate and deflate.” The capsules have an outer insulating membrane made of silicone enclosing an inner pocket filled with oil. Each bubble is surrounded by four electrodes, that can close like a zipper. When a voltage is applied, the electrodes are pulled together, causing the center of the capsule to swell like a blister. It is an ingenious system because the capsules, known as HAXELs, can move not only up and down, but also side to side and around in a circle. “When they are placed under your fingers, it feels as though you are touching a range of different objects,” says Shea.

[ EPFL ]

Through the simple trick of reversing motors on impact, a quadrotor can land much more reliably on slopes.

[ Sherbrooke ]

Turtlebot delivers candy at Harvard.

I <3 Turtlebot SO MUCH

[ Harvard ]

Traditional drone controllers are a little bit counterintuitive, because there’s one stick that’s forwards and backwards and another stick that’s up and down but they’re both moving on the same axis. How does that make sense?! Here’s a remote that gives you actual z-axis control instead.

[ Fenics ]

Thanks Ashley!

Lio is a mobile robot platform with a multifunctional arm explicitly designed for human-robot interaction and personal care assistant tasks. The robot has already been deployed in several health care facilities, where it is functioning autonomously, assisting staff and patients on an everyday basis.

[ F&P Robotics ]

Video shows a ground vehicle autonomously exploring and mapping a multi-storage garage building and a connected patio on Carnegie Mellon University campus. The vehicle runs onboard state estimation and mapping leveraging range, vision, and inertial sensing, local planning for collision avoidance, and terrain analysis. All processing is real-time and no post-processing involved. The vehicle drives at 2m/s through the exploration run. This work is dedicated to DARPA Subterranean Challange.

[ CMU ]

Raytheon UK’s flagship STEM programme, the Quadcopter Challenge, gives 14-15 year olds the chance to participate in a hands-on, STEM-based engineering challenge to build a fully operational quadcopter. Each team is provided with an identical kit of parts, tools and instructions to build and customise their quadcopter, whilst Raytheon UK STEM Ambassadors provide mentoring, technical support and deliver bite-size learning modules to support the build.

[ Raytheon ]

A video on some of the research work that is being carried out at The Australian Centre for Field Robotics, University of Sydney.

[ University of Sydney ]

Jeannette Bohg, assistant professor of computer science at Stanford University, gave one of the Early Career Award Keynotes at RSS 2020.

[ RSS 2020 ]

Adam Savage remembers Grant Imahara.

[ Tested ] Continue reading →

Posted in Human Robots

#437689 GITAI Sending Autonomous Robot to Space ...

Posted on November 24, 2020 by Android

We’ve been keeping a close watch on GITAI since early last year—what caught our interest initially is the history of the company, which includes a bunch of folks who started in the JSK Lab at the University of Tokyo, won the DARPA Robotics Challenge Trials as SCHAFT, got swallowed by Google, narrowly avoided being swallowed by SoftBank, and are now designing robots that can work in space.

The GITAI YouTube channel has kept us more to less up to date on their progress so far, and GITAI has recently announced the next step in this effort: The deployment of one of their robots on board the International Space Station in 2021.

Photo: GITAI

GITAI’s S1 is a task-specific 8-degrees-of-freedom arm with an integrated sensing and computing system and 1-meter reach.

GITAI has been working on a variety of robots for space operations, the most sophisticated of which is a humanoid torso called G1, which is controlled through an immersive telepresence system. What will be launching into space next year is a more task-specific system called the S1, which is an 8-degrees-of-freedom arm with an integrated sensing and computing system that can be wall-mounted and has a 1-meter reach.

The S1 will be living on board a commercially funded, pressurized airlock-extension module called Bishop, developed by NanoRacks. Mounted on the inside of the Bishop module, the S1 will have access to a task board and a small assembly area, where it will demonstrate common crew intra-vehicular activity, or IVA—tasks like flipping switches, turning knobs, and managing cables. It’ll also do some in-space assembly, or ISA, attaching panels to create a solar array.

Here’s a demonstration of some task board activities, conducted on Earth in a mockup of Bishop:

GITAI says that “all operations conducted by the S1 GITAI robotic arm will be autonomous, followed by some teleoperations from Nanoracks’ in-house mission control.” This is interesting, because from what we’ve seen until now, GITAI has had a heavy emphasis on telepresence, with a human in the loop to get stuff done. As GITAI’s founder and CEO Sho Nakanose commented to us a year ago, “Telepresence robots have far better performance and can be made practical much quicker than autonomous robots, so first we are working on making telepresence robots practical.”

So what’s changed? “GITAI has been concentrating on teleoperations to demonstrate the dexterity of our robot, but now it’s time to show our capabilities to do the same this time with autonomy,” Nakanose told us last week. “In an environment with minimum communication latency, it would be preferable to operate a robot more with teleoperations to enhance the capability of the robot, since with the current technology level of AI, what a robot can do autonomously is very limited. However, in an environment where the latency becomes noticeable, it would become more efficient to have a mixture of autonomy and teleoperations depending on the application. Eventually, in an ideal world, a robot will operate almost fully autonomously with minimum human cognizance.”

“In an environment where the latency becomes noticeable, it would become more efficient to have a mixture of autonomy and teleoperations depending on the application. Eventually, in an ideal world, a robot will operate almost fully autonomously with minimum human cognizance.”
—Sho Nakanose, GITAI founder and CEO

Nakanose says that this mission will help GITAI to “acquire the skills, know-how, and experience necessary to prepare a robot to be ISS compatible, prov[ing] the maturity of our technology in the microgravity environment.” Success would mean conducting both IVA and ISA experiments as planned (autonomous and teleop for IVA, fully autonomous for ISA), which would be pretty awesome, but we’re told that GITAI has already received a research and development order for space robots from a private space company, and Nakanose expects that “by the mid-2020s, we will be able to show GITAI's robots working in space on an actual mission.”

NanoRacks is schedule to launch the Bishop module on SpaceX CRS-21 in November. The S1 will be launched separately in 2021, and a NASA astronaut will install the robot and then leave it alone to let it start demonstrating how work in space can be made both safer and cheaper once the humans have gotten out of the way. Continue reading →

Posted in Human Robots