Tag Archives: technology
Singapore International Robo Expo debuts as the robotics sector is poised for accelerated growth
In partnership with Experia Events, the Singapore Industrial Automation Association sets its sights on boosting the robotics solutions industry with this strategic global platform for innovation and technology
Singapore, 18 October 2016 – The first Singapore International Robo Expo (SIRE), organised by Experia Events and co-organised by the Singapore Industrial Automation Association (SIAA), will be held from 1 to 2 November 2016, at Sands Expo and Convention Centre, Marina Bay Sands.
Themed Forging the Future of Robotics Solutions, SIRE will comprise an exhibition, product demonstrations, networking sessions and conferences. SIRE aims to be the global platform for governments, the private sector and the academia to engage in dialogues, share industry best practices, network, forge partnerships, and explore funding opportunities for the adoption of robotics solutions.
“SIRE debuts at a time when robotics has been gaining traction in the world due to the need for automation and better productivity. The latest World Robotics Report by the International Federation of Robotics has also identified Singapore as a market with one of the highest robot density in manufacturing – giving us more opportunities for further development in this field, and well as its extension into the services sectors.
With the S$450 million pledged by the Singapore government to the National Robotics Programme to develop the industry over the next three years, SIRE is aligned with these goals to cultivate the adoption of robotics and support the growing industry. As an association, we are constantly looking for ways to bring together robotic adoption, collaboration among partners, and providing support with funding for our members. SIRE is precisely the strategic platform for this,” said Mr Oliver Tian, President, SIAA.
SIRE has attracted strong interest from institutes of higher learning (IHLs), research institutes, local and international enterprises, with innovation and technology applicable for a vast range of industries from manufacturing to healthcare.
ST Kinetics, the Title Sponsor for the inaugural edition of the event, is one of the key exhibitors, together with other leading industry players such as ABB, Murata, Panasonic, SICK Pte Ltd, and Tech Avenue amongst others. Emerging SMEs such as H3 Dynamics, Design Tech Technologies and SMP Robotics Singapore will also showcase their innovations at the exhibition. Participating research institute, A*STAR’s SIMTech, and other IHLs supporting the event include Ngee Ann Polytechnic, Republic Polytechnic and the Institute of Technical Education (ITE).
Visitors will also be able to view “live” demonstrations at the Demo Zone and come up close with the latest innovations and technologies. Some of the key highlights at the zone includes the world’s only fully autonomous outdoor security robot developed by SMP Robotics Singapore, as well as ABB’s Yumi, IRB 14000, a collaborative robot designed to work in close collaboration and proximity with humans safely. Dynamic Stabilization Systems, SIMTech and Design Tech will also be demonstrating the capabilities of their robotic innovations at the zone.
At the Singapore International Robo Convention, key speakers representing regulators, industry leaders and academia will come together, exchange insights and engage in discourse to address the various aspects of robotic and automation technology, industry trends and case studies of robotics solutions. There will also be a session discussing the details of the Singapore National Robotics Programme led by Mr Haryanto Tan, Head, Precision Engineering Cluster Group, EDB Singapore.
SIRE will also host the France-Singapore Innovation Days in collaboration with Business France, the national agency supporting the international development of the French economy. The organisation will lead a delegation of 20 key French companies to explore business and networking opportunities with Singapore firms, and conduct specialized workshops.
To further foster a deeper appreciation and to inspire the next generation of robotics and automation experts, the event will also host students from higher institutes of learning on Education Day on 2 November. Students will be able to immerse themselves in the exciting developments of the robotics industry and get a sampling of how robotics can be applied to real-world settings by visiting the exhibits and interacting with representatives from participating companies.
Mr Leck Chet Lam, Managing Director, Experia Events, says, “SIRE will be a game changer for the industry. We are expecting the industry’s best and new-to-market players to showcase their innovations, which could potentially add value to the operations across a wide spectrum of industry sectors, from manufacturing to retail and service, and healthcare. We also hope to inspire the robotics and automation experts of tomorrow with our Education Day programme.
Experia Events prides itself as a company that organises strategic events for the global stage, featuring thought leaders and working with the industries’ best. It is an honour for us to be partnering SIAA, a recognised body and key player in the robotics industry. We are privileged to be able to help elevate Singapore’s robotics industry through SIRE and are pulling out all stops to ensure that the event will be a resounding success.”
SIRE is supported by Strategic Partner, IE Singapore as well as agencies including EDB Singapore, GovTech Singapore, InfoComm Media Development Authority, A*STAR’s SIMTech, and Spring Singapore.
For further enquiries, please contact:
Marilyn HoExperia Events Pte LtdDirector, CommunicationsTel: +65 6595 6130Email: email@example.com
Genevieve YeoExperia Events Pte LtdAssistant Manager, CommunicationsTel: +65 6595 6131Email: firstname.lastname@example.org
The post Singapore International Robotics Expo appeared first on Roboticmagazine. Continue reading
As ROS – Robot Operating System is being used by more and more robots, a new form of building robots that uses ROS is coming into play, which is called H-Ros, Hardware Robot Operating System. This is currently supported by several companies that adopt its standard interfaces. Each piece runs ROS 2.0 on its own has its own ROS nodes and topics. Building robots is about putting together different H-ROS components that can come from different manufacturers but still interoperate thanks to the standard hardware interfaces defined within H-ROS. The blocks that make up the system fall into 5 categories, which are, sensing, actuation, communication, cognition and hybrid components. Below is the press release provied to us by Erle Robotics, which is one of the several firms that are currently working on this.
Erle Robotics announced a new platform that provides manufacturers tools for building interoperable robot components that can easily be exchanged between robots
Photo Credit: https://www.h-ros.com/, www.erlerobotics.com
Erle Robotics announced during ROSCon 2016 in Seoul, Korea, a new game-changing standard for building robot components, H-ROS: the Hardware Robot Operating System. H-ROS provides manufacturers tools for building interoperable robot components that can easily be exchanged or replaced between robots.
Powered by the popular Robot Operating System (ROS), H-ROS offers building-block-style parts that come as reusable and reconfigurable components allowing developers, to easily upgrade their robots with hardware from different manufacturers and add new features in seconds.
With H-ROS, building robots will be about placing H-ROS-compatible hardware components together to build new robot configurations. Constructing robots won’t be restricted to a few with high technical skills but it will be extended to a great majority with a general understanding of the sensing and actuation needed in a particular scenario.
H-ROS was initially funded by the US Defense Advanced Research Projects Agency (DARPA) through the Robotics Fast Track program in 2016 and developed by Erle Robotics. The platform has already been tested by several international manufacturers who have built robots out of this technology. This is the case of H-ROS Turtlebot, which was presented during the conference in Seoul.
H-ROS is now available for selected industry partners and will soon be released for the wider robotics community. Additional information can be requested through its official web page at https://h-ros.com/.
Photo Credit: https://www.h-ros.com/, www.erlerobotics.comPhoto Credit: https://www.h-ros.com/, www.erlerobotics.comPhoto Credit: https://www.h-ros.com/, www.erlerobotics.comPhoto Credit: https://www.h-ros.com/, www.erlerobotics.com
The post H-Ros – Hardware Robot Operating System appeared first on Roboticmagazine. Continue reading
Spherical Induction Motor Eliminates Robot’s Mechanical Drive System
PITTSBURGH— More than a decade ago, Ralph Hollis invented the ballbot, an elegantly simple robot whose tall, thin body glides atop a sphere slightly smaller than a bowling ball. The latest version, called SIMbot, has an equally elegant motor with just one moving part: the ball.
The only other active moving part of the robot is the body itself.
The spherical induction motor (SIM) invented by Hollis, a research professor in Carnegie Mellon University’s Robotics Institute, and Masaaki Kumagai, a professor of engineering at Tohoku Gakuin University in Tagajo, Japan, eliminates the mechanical drive systems that each used on previous ballbots. Because of this extreme mechanical simplicity, SIMbot requires less routine maintenance and is less likely to suffer mechanical failures.
The new motor can move the ball in any direction using only electronic controls. These movements keep SIMbot’s body balanced atop the ball.
Early comparisons between SIMbot and a mechanically driven ballbot suggest the new robot is capable of similar speed — about 1.9 meters per second, or the equivalent of a very fast walk — but is not yet as efficient, said Greg Seyfarth, a former member of Hollis’ lab who recently completed his master’s degree in robotics.
Induction motors are nothing new; they use magnetic fields to induce electric current in the motor’s rotor, rather than through an electrical connection. What is new here is that the rotor is spherical and, thanks to some fancy math and advanced software, can move in any combination of three axes, giving it omnidirectional capability. In contrast to other attempts to build a SIM, the design by Hollis and Kumagai enables the ball to turn all the way around, not just move back and forth a few degrees.
Though Hollis said it is too soon to compare the cost of the experimental motor with conventional motors, he said long-range trends favor the technologies at its heart.
“This motor relies on a lot of electronics and software,” he explained. “Electronics and software are getting cheaper. Mechanical systems are not getting cheaper, or at least not as fast as electronics and software are.”
SIMbot’s mechanical simplicity is a significant advance for ballbots, a type of robot that Hollis maintains is ideally suited for working with people in human environments. Because the robot’s body dynamically balances atop the motor’s ball, a ballbot can be as tall as a person, but remain thin enough to move through doorways and in between furniture. This type of robot is inherently compliant, so people can simply push it out of the way when necessary. Ballbots also can perform tasks such as helping a person out of a chair, helping to carry parcels and physically guiding a person.
Until now, moving the ball to maintain the robot’s balance has relied on mechanical means. Hollis’ ballbots, for instance, have used an “inverse mouse ball” method, in which four motors actuate rollers that press against the ball so that it can move in any direction across a floor, while a fifth motor controls the yaw motion of the robot itself.
“But the belts that drive the rollers wear out and need to be replaced,” said Michael Shomin, a Ph.D. student in robotics. “And when the belts are replaced, the system needs to be recalibrated.” He said the new motor’s solid-state system would eliminate that time-consuming process.
The rotor of the spherical induction motor is a precisely machined hollow iron ball with a copper shell. Current is induced in the ball with six laminated steel stators, each with three-phase wire windings. The stators are positioned just next to the ball and are oriented slightly off vertical.
The six stators generate travelling magnetic waves in the ball, causing the ball to move in the direction of the wave. The direction of the magnetic waves can be steered by altering the currents in the stators.
Hollis and Kumagai jointly designed the motor. Ankit Bhatia, a Ph.D. student in robotics, and Olaf Sassnick, a visiting scientist from Salzburg University of Applied Sciences, adapted it for use in ballbots.
Getting rid of the mechanical drive eliminates a lot of the friction of previous ballbot models, but virtually all friction could be eliminated by eventually installing an air bearing, Hollis said. The robot body would then be separated from the motor ball with a cushion of air, rather than passive rollers.
“Even without optimizing the motor’s performance, SIMbot has demonstrated impressive performance,” Hollis said. “We expect SIMbot technology will make ballbots more accessible and more practical for wide adoption.”
The National Science Foundation and, in Japan, Grants-in-Aid for Scientific Research (KAKENHI) supported this research. A report on the work was presented at the May IEEE International Conference on Robotics and Automation in Stockholm, Sweden.
Video by: Carnegie Mellon University
About Carnegie Mellon University: Carnegie Mellon (www.cmu.edu) is a private, internationally ranked research university with programs in areas ranging from science, technology and business, to public policy, the humanities and the arts. More than 13,000 students in the university’s seven schools and colleges benefit from a small student-to-faculty ratio and an education characterized by its focus on creating and implementing solutions for real problems, interdisciplinary collaboration and innovation.
Carnegie Mellon University
5000 Forbes Ave.
Pittsburgh, PA 15213
Contact: Byron Spice For immediate release:
412-268-9068 October 4, 2016
The post Omnidirectional Mobile Robot Has Just Two Moving Parts appeared first on Roboticmagazine. Continue reading
Servosila, a robotics technology company, announced a launch of a new line of robotic arm manipulators specifically targeted at mobile robotics market.
“Servosila Robotic Arms are the first manipulators specifically designed for mobile robots,” – said the company’s spokesperson, – “it is very easy to retrofit any existing robotic chassis or a torso with a Servosila Robotic Arm”.
Servosila Robotic Arms are attachable payload modules for mobile service robots or other robotic platforms. Servosila Robotic Arms shall typically be mounted on a chassis or a torso of a mobile robot and be powered by an on-board power supply system of the host robotic platform.
The robotic arms can be used both outdoors and indoors. The arms are water-tight, dust-proof and function properly in the rain and in the snow. The arms are designed to withstand impacts, collisions with obstacles and, in general, the harsh treatment so common to mobile robotics applications.
The servo drives and external electrical connectors of the robotic arms are water-tight and dust-proof (IP68 rating). The entire arm can be occasionally submersed in water without any adverse effects on its performance. The robotic arms may be operated in cold or hot weather.
Mobile robots tend to bump into things and hit obstacles while on the move. The harsh nature of outdoor mobile robotics applications caused a profound effect on the design of Servosila Robotic Arms, especially on the internal structure of servo drives and their harmonic reduction gears.
There are no exposed cables on the outside of the robotic arms that could be torn off when a mobile robot moves through bushes or forests.
Numerous protection measures built into electronic servo controllers and mechanical parts of Servosila Robotic Arms ensure reliable operation on-board of outdoor mobile service robots.
Servosila Robotic Arms are lightweight by design. For a given lifting capability, Servosila Robotic Arms have a significantly lower weight than their industrial counterparts. The lower weight of a Servosila Robotic Arm enables a mobile robot equipped with the arm to operate longer on a single battery charge, keep its center of gravity lower for better balance, climb stairs easier or have a superior mobility.
When not in an active use, Servosila Robotic Arms can folded into a very compact form that doesn’t occupy much space on the top of a robotic chassis or on the side of a torso. This feature protects the robotic arm of a mobile robot in case of an unexpected collision with an obstacle or whenever a rough terrain is encountered by the mobile robotic platform. The compact folded form also comes handy during transportation.
By folding its robotic arm into the compact form, the robot frees up its working area for other payloads to operate in. This is useful in case the robot is equipped with additional payloads other than the robotic arm.
Photo Credits: Servosila Limited (Hong Kong)
The post Servosila Robotic Arms launched appeared first on Roboticmagazine. Continue reading